jbrodeur30
Well-Known Member
I'm going to buy a wheel king what are so good upgrades that are cheap
wheely king
- Thread starter jbrodeur30
- Start date
northerngames
Well-Known Member
there is two plastic bushing in each of the steering components.
there is two in the crank and two in the pivot.
these can be swapped out with bearings for around $6.00 off ebay.
I also suggest the steering arm from korea off ebay for $9.00 plus shipping it tool about a week to recieve but I like it most of all makes it is beefy and has a nice finish out of the bag.
so for around $20.00 it would make the steering night and day.
you may also want to grab a servo from cpe there cheap powerfull and they work.
stock is somewhat weak and will get tired fast if you drive it hard wich you should
there is two in the crank and two in the pivot.
these can be swapped out with bearings for around $6.00 off ebay.
I also suggest the steering arm from korea off ebay for $9.00 plus shipping it tool about a week to recieve but I like it most of all makes it is beefy and has a nice finish out of the bag.
so for around $20.00 it would make the steering night and day.
you may also want to grab a servo from cpe there cheap powerfull and they work.
stock is somewhat weak and will get tired fast if you drive it hard wich you should
JKRacing37
Well-Known Member
What do you plan on doing with the truck? If it's going to be purpose built that would be helpful to know to suggest necessary upgrades first.
Welcome aboard!
Welcome aboard!
kevinatfms
Well-Known Member
to start would def be the front mounted servo and metal transmission gears. then the crawler king/brackets/driveshafts. then clodbuster tires and wheels.
jbrodeur30
Well-Known Member
Can I put the Vxl 3 m in it
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
OldSchoolDude
Well-Known Member
Wasn't this already answered in your other thread?
The stock WK drivetrain will not handle much more than a 19T brushed motor... maybe 15T if your easy on it.
If you want a brushless system, you have to upgrade the tranny to the RC4WD steel tranny gears (about $50 + shipping) and upgrade the diff gears at a minimum. You need to review "northerngames" heavy duty axle thread for more info
http://www.rcmt.net/forums/showthread.php?23182-Complete-Wheely-King-HD-Axle-build-part-for-part-with-pictures
The stock WK drivetrain will not handle much more than a 19T brushed motor... maybe 15T if your easy on it.
If you want a brushless system, you have to upgrade the tranny to the RC4WD steel tranny gears (about $50 + shipping) and upgrade the diff gears at a minimum. You need to review "northerngames" heavy duty axle thread for more info
http://www.rcmt.net/forums/showthread.php?23182-Complete-Wheely-King-HD-Axle-build-part-for-part-with-pictures
jbrodeur30
Well-Known Member
Yes but I just thought because it a 1/16 th motors
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk