TXT-2.0's Clod Build
- Thread starter TXT-2.0
- Start date
TXT-2.0
Mod Wrapper
ding ding ding you are correct KK
i love how that setup looks so i copied it as best as i could 
TXT-2.0
Mod Wrapper
:emot15::emot15::emot15::emot15: ill get right on that BillTom I think what you have hear is a mess. The only way to make it look better is to put it at my house.
TXT-2.0
Mod Wrapper
axles will be under the chassis as much as possible so shocks should be close to where they are now , im going for a 12-12.5 wb ... shocks will be mounted as far to the bottom outside as possible and as close to the frame to have that / \ look .
KingClod27
Well-Known Member
Very nice Tom! that came out exactly how you planned it...looks just like GD Legend
ElectricBeast
Member
Those headers look great man! I wanted mine to come down and out under the body like that but the ones I bought aren't shaped right to do that. What size of tubing did you use to make them?
TXT-2.0
Mod Wrapper
got one wheels done
cpe beadlocks on Nylon clod wheels with my own touches .... faux planateries added , i need to email rc4wd and get the small hex nuts from there planatery hubs
deal fell through on my set of axles i had coming but i got another set coming so hopefully get this train rolling lol....
cpe beadlocks on Nylon clod wheels with my own touches .... faux planateries added , i need to email rc4wd and get the small hex nuts from there planatery hubs
deal fell through on my set of axles i had coming
but i got another set coming so hopefully get this train rolling lol....
rocpede4x4
Well-Known Member
Looks awsome an that sucks about the axles. Glad you have found another set.
TXT-2.0
Mod Wrapper
Yup thats all it takes Tom ....just had to find the right size and I think its a good fit
HawnMT
Well-Known Member
Sorry been meaning to do a "how to" on that but never got around to it. I had taken pics of the process but my desktop crapped out and all the photos were on it. I got the hard drive wired up to my laptop now but haven't gotten around to transferring the pics over.
Steve (kong808) was the one who came up with the idea and he asked me to do the how to. In short there's two ways to do it. One is to punch a hole in the bottle cap and use the wheel nit to hold that on. Then cut the thread portion off the bottle and glue a flat circular piece on that and decorate it as a planetary. hen you just screw it onto the the bottle cap already on the wheel.
The second way is almost the same except the bottle cap is the planetary and you glue the flat piece to the threaded part and screw it to the wheel.
Steve (kong808) was the one who came up with the idea and he asked me to do the how to. In short there's two ways to do it. One is to punch a hole in the bottle cap and use the wheel nit to hold that on. Then cut the thread portion off the bottle and glue a flat circular piece on that and decorate it as a planetary. hen you just screw it onto the the bottle cap already on the wheel.
The second way is almost the same except the bottle cap is the planetary and you glue the flat piece to the threaded part and screw it to the wheel.
TXT-2.0
Mod Wrapper
ok finally got my axles in and started to really mock it up , im stupid to have started without them but impatiences lol..
so center tray is being reworked to clear the upper links ..... i was trying to remember when i started the size of clod axles (been a while since i had them )
shocks are re worked , had to ditch the wk shocks being they were just to long so maxx front and pede fronts for the rear
just a quick mock up right now but links are done more tonight will be done
so center tray is being reworked to clear the upper links ..... i was trying to remember when i started the size of clod axles (been a while since i had them )
shocks are re worked , had to ditch the wk shocks being they were just to long
so maxx front and pede fronts for the rear just a quick mock up right now but links are done more tonight will be done