Twin Hammer

[Tad]

Just got mine in the mail today. So far I opened it removed the sticker and ran it for about two minutes in my shop. I like it so far. Looks to be pretty strong. Only thing I dislike so far is the battery location. Now to tear it down and make it brushless

 

[william g]

Tad can you do a side by side comparison shot next to something so we can gauge it's size?

 

[Spidubic]

I have seen a picture of this next to the Axial Jeep. It is about 2" shorter in length and an inch or so lower. Almost seems 1/12 or 1/14 scale. Or just a small 1/10 scale buggy.

 

[Tad]

Will snap a few tonight hopefully.

I tore it apart last night. The cage is a little work to get off but not to bad. I love the motor mount. You remove two screws rotate it up and the motor and plate just slides out. I had a traxxas velineon 3500 motor so I threw it in with a castle sidewinder esc. I had to cut the dust cover because the shaft on the motor was so long it hit. No big deal will be hard to get dirt in that area anyway. Ran it for a few minutes today. In low gear it is has around the same speed as before in hi gear. Now hi gear is more fun lol. I am running 4200 2s shorty lipo pack. The truck jumps well and handles pretty good. The extra speed and larger pack has made it a little top heavy. So you need to finesse the corners a little. Not sure if I am happy with the motor may go to a 4600 and see what that does. Will try to get some video this weekend.

 

[JKRacing37]

I have seen a picture of this next to the Axial Jeep. It is about 2" shorter in length and an inch or so lower. Almost seems 1/12 or 1/14 scale. Or just a small 1/10 scale buggy.

In a "scale" sense it's going to be smaller. The KOH rigs it's based off are smaller than say a 1:1 trophy truck.


Sent from my iPhone using Tapatalk

 

[Tad]

Took a few shoots next to a wheely king and I stuck a truck body on it just to see how it fit.

I love watching this truck run. The suspension soaks up all the bumps just like the real trucks. I plan on stiffening up the rear it is just a little to soft for me.

 

[nosyajg]

truck body looks perfect on there!

 

[william g]

Wow
the silverado is a perfect fit

Thanks Tad

 

[fatboy]

Not trying to high jack this thread but. Your wheely king in the back what chassis is that? And is there a build thread of it on here? Thanks

 

[Tad]

Well it is a truck I got from Zyck a while back. It is a ttr stampede upper chassis and he had a lower made for it. I didn't like the lower and part of the upper so I have redone about the entire truck. Need to finish it like the other 20 things sitting on my work bench lol.