Truck turns more one way

[87lc2]

Having a strange issue with one of my trucks. It turns more right than it does left. The servo is mounted in the stock location and centered. Swapped different servo in and it still does the same thing. Could it be the radio? I dont see how, but I really dont know what else could cause this. Have played with the trim and other adjustments on radio and no change. Steering isnt hanging up anywhere. Any input appreciated.

 

[scottyK]

Does your radio have EPA (end point adjustment)??

 

[joe]

you could have the wrong size linkage coming from the servo.
just because the servo horn is "centered" doesnt mean that you will get full throw both ways.

 

[87lc2]

Does your radio have EPA (end point adjustment)??

No, its a crappy radio, only has trim.

 

[87lc2]

you could have the wrong size linkage coming from the servo.
just because the servo horn is "centered" doesnt mean that you will get full throw both ways.

Its all stock linkage, i can watch the servo as i physically turn the wheel on the radio, it turns more one way than the other. Very strange. Especially since ive tried to different servos.

 

[Jerry Matoon]

Make sure that the bellcrank in the gearbox is perpendicular (90 degrees) at center. If not then you need to recheck the length of your rods to straighten your tires back out.

Jerry