Some help with Slash measurements...

[4u2nv]

Could someone give me some measurements on a Slash.

I'd like to know the wheelbase...
the length from wheelnut to wheelnut.

Also the width of the front from the outside edge of the axles, also the same width in the rear.

Thanks for the help guys.

 

[Jerry Matoon]

According to my trusty ruler and my not so good eyes; this is what i have found on my Slash with a relaxed suspension.

Wheelbase= 33cm
Front track = 25.5cm (end of axle to end of axle includes threads)
Rear track = 26.5cm

hope this helps:tmb
Jerry

 

[4u2nv]

If my calculations are correct this is in inches?

Wheelbase= 33cm - 13in
Front track = 25.5cm - 10in (end of axle to end of axle includes threads)
Rear track = 26.5cm - 10.4in

 

[4u2nv]

Thanks for the help. I just found this on Tower...

SPECS: Vehicle-
Length: 22.36" (568mm)
Width: 11.65" (296mm)
Height: 8.42" (214mm)
Front and Rear Track: 11.65" (296mm) distance between outer edges of
wheels
Wheelbase: 13.2" (335mm)
Ground Clearance: 3.5" (89mm)
Weight: 76.2oz (2.16kg)
Body-
Length: 21.3" (542mm)
Width: 11.4" (289mm)
Height: 5.3" (135mm)

Probably should have checked there first.

 

[BillH]

Wheel base is tricky as the front arms are angled and will vary the wheel base depending on ride height.