Product help

[FlashGordon1]

Good morning members

RE: http://store.rc4wd.com/L-Shape-Aluminum-Servo-Mounts_p_319.html

I have a question to ask about the item that is listed above. Could this work with this item within this link? http://www.facebook.com/photo.php?fbid=156174781070574&set=o.51174056776&type=1&theater

A friend of mine on clodtalk fabricated one for me and I can't seem to get the part to be secured to the axle 100 %. Help a brother out and thanks

 

[william g]

you may have to clamp it into place to drill mounting holes as the factory ones may not line up, or may allow movement

 

[th67ss]

The one from Rc4wd bolts to the factory axle brace and the one on face book replaces that factory brace and look like it can accept a servo with some stand offs.

 

[FlashGordon1]

you may have to clamp it into place to drill mounting holes as the factory ones may not line up, or may allow movement

But I do have one problem tho, I do not have a drill press. I just have a weak Black and Decker drill.

 

[HawnMT]

On that facebook brace/mount, a servo alone barely fits in that mount, so that RC4WD mount and the servo won't fit inside. Unless you're going to mount the servo on top?

 

[william g]

But I do have one problem tho, I do not have a drill press. I just have a weak Black and Decker drill.

center punch your marks and use a hand drill
I did that for eons. A fairly sharp drill is all you need.

 

[FlashGordon1]

center punch your marks and use a hand drill
I did that for eons. A fairly sharp drill is all you need.

Ok,and thanks. I will keep all of you posted.