Parts Needed

[TNT_Pulling]

Greetings,

The NRCTPA Pro-Stock raffle Tractor is almost ready, but LACKS a very important part . . . . the motor!

Some of you may think that we had a motor donated, well we did, but it has not arrived and the donor is NOT replying to messages on this forum and personal messages sent to him. I understand people are busy, but the motor was "shipped" almost a month ago and I am worried it is lost in the mail, but I can't confirm.

If the orginal donated the motor arrives after someone else makes a donation of one, we will worry about that when and if it happens. LOL

We are also needing a charger that will charge 7-cell NiMh batteries, so if anyone (or club) wants to make that donation that will be great.

Thanks,

Chris B.

 

[dlmealy]

There has been a change in the donations on this end. County Line is now going to donate the rear tires and rims. We are going to build a roll cage and some detail work. The tractor is at Hooter's and looks good. Thanks to all that has helped in this project.

Darren
Team BNB

 

[pregess3]

Chris,
Would a couple of 17x2 work for now, I found 2 brand new ones I had for my spec truck that I had forgotten about, if those would work I'll ship them off to Hooters....J.J.

 

[TNT_Pulling]

Greeting

Would a couple of 17x2 work for now, I found 2 brand new ones I had for my spec truck that I had forgotten about, if those would work I'll ship them off to Hooters

Glen & Helen have a motor that they were going to put into the puller until a motor was donated. If you (JJ) want to donate a motor that will be great, but I think we need to get more people and club involved, not just the select few.

Here is the list of people that are donating to the project . . . please NOTE that as of last week (June 12) NOT all of these people have paid for the parts they are donating NOR have all of the people shipped their items.

Shipped/paid Item
XX Pro-Stock Chassis - Hooter Chassis & Hobby Shop
XX IH Wood Pro-Stock body - JJsPrecisionGuesswork
?? Gears & Rear Axle - Al Fowler
XX Rear Hubs - Eric Krush
?? Tires & Rims ? County Line Pullers
XX Radio System - Phil's Hobby Shop
XX Novak Dually ESC - Chris Bercaw (TNT Pulling)
?? Mini Suit Case Weights ? Vince Nelson
Motor - Bart Maimone
?? 7-cell NiMh Battery ? Josh Harris
XX Front End Assembly ? Gene Nine
?? Tire Inserts - Mossis A.
?? Roll cage & Detail Work- Darren & Laura Mealy
Fuel Cell -
Charger -

Thanks to all that have came through.

 

[pregess3]

Chris,
Tell you what, if you don't get a motor soon, just drop me a line and I'll have one in the mail. ..J.J.

 

[TNT_Pulling]

if you don't get a motor soon, just drop me a line and I'll have one in the mail

Thanks JJ for the offer, I will let you know if I don't receive the motor soon.

The tractor is at Hooter's and looks good

Was the tractor at the event this weekend for people to look at and buy tickets? Some tickets were suppose to be shipped to Hooter's last week, so they should have some by now.

Chris B.
TNT Pulling

 

[TNT_Pulling]

Thank you to the following additonal people that have donated to the Pro-Stock Tractor raffle.

Todd and Zach Bartos are making a fuel cell

John Etzler Family donated a "2005 NRCTPA World Championship" DVD to give away w/tractor

Thanks,

Chris B.
TNT Pulling

 

[rcpuller]

Chris

Let me know if you would like some Vinyl lettering made for the tractor. Also please let me know if there is any other details needed..

Jeff

 

[TNT_Pulling]

Thank you to the STPA for donating a charger for the raffle.

Stay tuned for pictures of this AWESOME puller . . . .

 

[Guest]

I was a little slow on payment but my donation should be at hooters. I mailed a check out the other day.

 

[Mo']

i have the inserts boxed up, i just need the address to send them too.







Morris :willy

 

[pregess3]

Morris,
The address I have for Hooters is:
Hooter Chassis and Hobby Shop
RD#1 Box 99 Rt. 322
Utica, Pa. 16362
1- 814- 425-3122
Glenn and Helen are great people, if you need anything just give them a call and they do what they can to get you what you need...J.J.

 

[TNT_Pulling]

Who is the "guest" that was slow on their payment?


Morris,

This is the address to which I sent all the items I had collected for the tractor.

Hooter Chassis and Hobby Shop
1386 US 322
Utica PA 16362-2926

814-425-3122

I am sure that JJ's address will work, but it looks like an old address.

Thanks,

Chris B.
TNT Pulling

 

[TNT_Pulling]

Originally posted by rcpuller@Jun 27 2006, 10:43 PM
Chris

Let me know if you would like some Vinyl lettering made for the tractor. Also please let me know if there is any other details needed..

Jeff

Greetings Jeff,

If you want to make vinyl lettering/decals for the Pro-Stock Tractor, what do you think about giving a coupon with the tractor that is good for vinyl lettering/decals. That way the winner can choose what they want on the tractor for a name or design.

Thanks,

Chris

 

[pregess3]

Chris,
Your address is correct, mine was from an old sticker I've had by my computer for a LONG time... :willy ...J.J.

 

[ricrush]

Yes I was the moron that was not signed in and said my payment was slow I guess like my brain. :willy The payment should be there for sure. Boy its easy to end up not signing in and post. Not llike the old board.

 

[TNT_Pulling]

I was the moron that was not signed in and said my payment was slow

Eric,

You are NOT a moron! I was just wondering who it was as there are a couple people that need to pay and I want to make sure the right person is marked paid. LOL

Thanks,

Chris B.
TNT Pulling

 

[TNT_Pulling]

Would a couple of 17x2 work for now . . .
if you don't get a motor soon, just drop me a line and I'll have one in the mail. ..J.J.

Here is the motor spec for the Pro-Stock Tractor. If that motor fits the specs, then it will work and be welcomed.

-Any readily available* R/C motor with a nonadjustable
end-bell (Stock Motor*). or Econo
Modified* motor (These shall be 05 can size modified motors with a maximum manufacturer?s suggested list price of $50.00.)

Thanks,

Chris B.
TNT Pulling

 

[TNT_Pulling]

I am still in need of some parts to make the NRCTPA Pro-Stock Raffle Tractor complete.

I have had a couple people say that they will donate these items, but I have not received them so i am asking again.

** Motor
** Rear tire inserts

Thanks,

Chris B.
TNT Pulling

 

[TNT_Pulling]

Still in need of a motor for the Pro-Stock Tractor that will be raffled off at the World's . . . . is there not anyone out there that will donate a motor? How about making a donation of the CASH to buy the motor?

Thanks,

Chris B.
TNT Pulling