part numbers to build a working txt tranny?

[madhaw]

hello guys.. i'm planning on making an E-terra crusher and using a txt tranny to drive it.

Searching on ebay, i have no luck finding a txt tranny. I was wondering would it be practical to just build one by buying all the parts need?

if so, can anyone help me set up a list of what is needed?

Many thanks
-madhaw

 

[Supreme Reign]

I think this is everything:
Tranny Parts
S/N Part Number Description QTY
0005759 A Parts - Axle Housing 1 pc
9335321 Gear bag - Transmission Gears 1 set
4245017 Gear Box Plate - Dual Motor Mount Plate 1 pc
9805809 Gear Case Spacer 2 pcs
9805812 (MR9) - Gear Shaft B (2) 1 set
9805812 (MR8 ) - Gear Shaft A -

 

[HawnMT]

you'll also need:

QTY Descrition Part Number reason
(1) Screw Bag E PN# 9465587 just for the ME7 spacer
(1) Heat Sinks A&B PN# 9805657 MR21 & MR22
(1) Screw Bag G PN# 9465589 for drive shaft MG3
(1) 6x11mm PN# 9805802 special sized bearing, 2 in bag

then there are the various screws (3 are tampered head, and 2 are long M3 x 32mm)and nuts, and bearings or bushings.

Madhaw, if your interested, PM me I have most but not all of this stuff. I used to have a few extra TXT trannies but traded them away. I only have about 80% of a tranny now and a couple of extra new gear sets.

 

[madhaw]

thanks guys :tmb