nothing here

william g

william g

Retired
Moderator
Has anyone been wanting to build a ''wheely pounder''?

I have most of the parts here to setup for somebody's axles and transmission. I can set you up for a 4 link, or if you prefer a stock plastic arm setup. You do have to run a axle mounted steering setup, I do not do a chassis mounted servo system.

I should be receiving some more materials this coming week so I don't need your answer tonight, just putting word out I can provide some build up items or further if needed.

I'm also thinking of selling my Monster Mutt WK to be able to purchase some new motors for my other trucks so if that interests you please contact me on that too. MM has never been driven outdoors only tested in my livingroom.
 
4u2nv

4u2nv

Well-Known Member
I have my stock wheely king here looking to be upgraded... what do you have there? I may be interested in a chassis setup.
 
william g

william g

Retired
Moderator
I have everything here to make a wheely pounder from a running WK once a few aluminum tubes arrive for cross braces.


 
william g

william g

Retired
Moderator
either solid aluminum rod drilled and tapped or 6/62 all thread and K&S alum tube

I need to buy some more Tap Magic soon too or I'll be eating taps :willy
 
monsterjamman24

monsterjamman24

Well-Known Member
Will's Wheely Pounders are amazing, fast, light and tough. I bought the one included in the picture will posted(below as well) and I have only ran it once(broke the servo saver after a end over end crash close to full out with a 5700kv motor off a jump) Well worth the investment, mine flat out flys like a rocket ship.


william g said:
I have everything here to make a wheely pounder from a running WK once a few aluminum tubes arrive for cross braces.



Click to expand...
 
william g

william g

Retired
Moderator
If you send me your WK or send axles-trans-batt box-shocks the pricing is as listed.

Or sending nothing and just want parts I'd have to adjust my prices.

What I would need to know...
Do you want a long wheelbase for clod tires, or staying with 2.2 wheels? No price difference but I'd need to know.

2 gp chassis plates from CPE = 45.00
5 chassis cross braces @ 2.50 each = 12.50
8 susp links ends & 2 tamiya brackets = 12.50
trans and batt mount blocks, hardware, spacers and misc needed items for assembly 30.00
total 100.00 plus 12 to ship fully assembled, or 8 to ship as parts box.

The chassis and cross braces cost me exactly what I charge you because I order them premade. All other items are stock I order, then assemble or Cut/build modify to an order.
 
4u2nv

4u2nv

Well-Known Member
Boy Will... What's the profit there... $3.00 :willy That's a heck of a deal. I guess it keeps you building though without spending your own $$$
 
william g

william g

Retired
Moderator
4u2nv said:
Boy Will... What's the profit there... $3.00 :willy That's a heck of a deal. I guess it keeps you building though without spending your own $$$
Click to expand...
hmmm, didn't figure in any of that...
Wonder how much power, and tool wear would play into it as well? I'd better stop breaking taps then huh? :doh
 
G

Gaylord Sauls

Well-Known Member
GPchassis and parts.....

Would be interested in the GP built to order, however, just sold my WK so I don't have all the parts you list from the WK.:bang Do you have the parts to build a complete clod wheelbased chassis? I know it would be more than the price listed, but I'm very interested in this truck. Contact [email protected]. Thanks
 
william g

william g

Retired
Moderator
I don't have enough of the WK parts here, I only have 1 complete used axle.

I'm to broke and in debt now to order or buy anything myself or I would. Find somebody to buy my monster mutt, or my TCS Savage and I can breathe easier and afford to parts source. :laugh

You could buy the parts, or a used WK and have it shipped here. I really only need a trans case and battery box to get the majority of it done. So really if you bought those 2 things...
 
You must log in or register to reply here.
Top