NG's extreme force build

northerngames

northerngames

Well-Known Member
sorry for no recent updates on this but it is still going slow.

My 1/1 dodge needed new brakes rotors and calipers and burn through them in 2 weeks on one side only to find it was a collapsed line and it was not allowing the driver side to release and then I had to get that replaced along with the said side all over again.

so that set me back.

then I decided to get carb and pipe rebuild kits for my banshee.

between the two the funds and time consumed has set me back in this a bit but I finally got the last of my body decals ordered from canada.

I litterly had to buy and use 4 different sheets to get this body were I want it looks wise.

I only need two off decals one sheet and two off another and at $18 a sheet the way I look at it again is I had to pay another $9 a sticker :mad

I am shooting for a classic collage look based off this one.



the one sheet I am just after the side emblems of the truck doing the burnout and the other sheet is the bigfoot lettering itself for the doors not shown in that pic.

I have some bigfoot lettering on the truck now from another sheet but the size and color is off for me so I ordered a sheet of just them to get the look and color I am after.

Should look awesome when done though and will be listing the spares so I will have a ton of bigfoot decals for sale soon here, like enough to do at least 3 more lol.

I figured I have so much into this already and I am certianly not going to cheap out on the body for it.

I now relize i am going to need a basher body thouogh becuase this one may turn out way to nice to go to beat up when all said and done.

I am still stewing on the monster pirate roll bar, side mirrors, antenna, and wiper install so it looks even more like the one pictured above.

I already have them but the body is looking good already and not sure if I want to go punching more holes in it :p
 
northerngames

northerngames

Well-Known Member
thanks there is a bigfoot clod on ebay right now that has the two side stickers I am throwing on it out of the other two kits

http://www.ebay.com/itm/301263924280?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_76wt_907

I am going to remove the bigfoot lettering I have on there now and replace it with those two and run the trim down the bottom of mine like it is in the pic above or but the furestone logo's in the spot like the later bigfoots had and then after that I have to decide with or without the pirate roll bar and if I am going to go with the usa-1 motor or my new muscle machine motor or perhaps leave them both out.

not sure yet but more to come soon.
 
northerngames

northerngames

Well-Known Member
yeah I thought I would be all set with the first sheet then found out the bigfoot lettering itself is off in both color and scale the way the 4x4x4 under it is done on that one.

it also lacked the firestone emblems and the burn out emblem on the side's.

so I ordered the 2nd sheet for just the bigfoot 4x4x4 emblems that are the correct color and scale and then had to order the 3rd for the firestone and burnout emblems.

I was not too happy about having $50+ into stickers but I have more then that in certain parts themselve's and to me it's one of the main things to have looking good for this build out of all the parts so I bit the bill I guess :p

I have plenty of spare's now and enough to make a more current bigfoot version wich I may still becuase I need one for show and one for basing out.
 
northerngames

northerngames

Well-Known Member
Not really I been silly busy with work and got side tracked on a couple other builds with the intent to sell them to fund this project's electronics.

I did get the more better bigfoot decals in but I have not applied them to it yet either.

I am getting the itch to get going on it more but just been strapped for time and money the past month but should be able to pickup where I left off soon here.

my 1/1 dodge had both batteries crap out wich was like $210 for them and my banshee's right carb started to leak so I had to get the rebuild kits for both carbs rebuild them and have it tuned so that all set me back in time and money too but I will be back on this soon :p
 
You must log in or register to reply here.
Top