need suggestions on how to keep my front wk wheels on a custom build

[northerngames]

need suggestions on how to keep my front wk wheels on a custom build

I am using this kit

http://www.ebay.com/itm/Hot-Racing-HPI-Wheely-King-aluminum-wide-hex-hubs-WK10W01-/290971161458?pt=Radio_Control_Parts_Accessories&hash=item43bf3b9372#ht_2105wt_679

added a toothed washer between the wheel and the black aluminum round deal that say's hot racing on it and figure the toothed washer is now just slipping on it.

I get about 30 yards out of it and the front keep breaking loose on me.

is it cool to use thread lock or is there other methods.

I just got the truck done and everything is great but this is driving me nuts already becuase I cannot drive it very long without the front wheels ready to fly off each time lol.

 

[kjr2]

Blue thread locker should be ok.

 

[northerngames]

they seem to be holding and think the blown rear ring and pinion was the culprit.

if they do it again I will thread lock them then though becuase I had enough of that already lol.

 

[william g]

use threadlock, and let it sit to dry over night for best results

That is what I do on any barrel nut I use, reason, hate to lose one so I've done this and not looked back since.