MFC-02 BEC & Motor specs??? Thanks :)

[kev4evr]

I am growing more curious of the MFC-02 for setting up my upcoming Hi-lux

1st. What is the BEC of the MFC-02? I use a Rebel 2 in my CR01 due to the dual high torque servos, the Rebel puts out 6V/3amp.

If I run a single high torque high power servo to utilize the 4-wheel steering the high lift, is this something the MFC-02 can handle?

2nd. Motor limit? The MFC-02 says stick with the silver can, but can you go to a higher turn motor like the CRtuned 35T motor, or the 28T lightly tuned? Or even chance the Sport Tuned Black can motor?

Thanks everyone! I am really anxious to build this kit, going to order one here soon. 20 years in the Hobby, just getting back into it.

 

[Electrohacker]

it should be 1 amp

I bet you could run one high torque servo for front steering, one standard for shifting, and one standard for rear steer (I ran like this for a long time with a rooster 1amp bec)

 

[kev4evr]

it should be 1 amp

I bet you could run one high torque servo for front steering, one standard for shifting, and one standard for rear steer (I ran like this for a long time with a rooster 1amp bec)

Thanks, I assumed it was 1am considering its probably the same guts as their basic ESC they provide with all their kits (example my re-issue frog)

So how did you run that set up, with a servo splitter, & with 1am they did not drag? I figure one High Tourque servo would do the trick, I am running two Futaba s3305's with the metal gears on my CR01.

I really like the overall setup of the MFC-02, debating on using a standard ESC with the TLU-1/2 set up. But the sound & demo mode are very impressive for a scale set up!