Looking for some Juggernaut parts..

rocpede4x4

rocpede4x4

Well-Known Member
Looking for some parts for my juggernaut's.

Battery strap and the mount that holds the battery strap to the top chassis.
4 mounts that hold the back of the top chassis to the side of the chassis, to support the battery tray.
4 lower shock mounts that hold the u-bolts to the axle.

Any help would be nice and I have PayPal ready, if anyone has the parts.

Sent From My 2500 HD Tapatalk 2
 
Arcocustom

Arcocustom

Well-Known Member
These MF4 mounts?
*note* I takes two to MF4's to bolt the battery tray to the chassis and then two more MF4's to bolt the Cab of the body to the battery tray.



If so, I searched everywhere for them and this was the cheapest place I found.

This is it here for the f-350 High-Lift and it is in-stock.



http://www.tamiyausa.com/items/radio-control-parts-70/7-digit-spare-parts-71010/rc-metal-parts-bag-f-58372-9400454

Tamiya USA also also has the plastic battery strap and the clamp that holds the strap in-stock as well.

ITEM# 0005724 (RC G Parts: 58256/58232)
http://www.tamiyausa.com/items/radio-control-parts-70/7-digit-spare-parts-71010/rc-g-parts-58256-58232-0005724

The sprue with the shock mounts is Item #0005721 (Juggernaut) & #0005722 (Juggernaut 2) and they are quite rare.
I have looked for a long time and never found one. I blame the Clod Buster guys for going after the wheel hubs... :rolleyes

http://www.tamiyausa.com/pdf/manuals/58232ml.pdf
http://www.tamiyausa.com/pdf/manuals/58256ml.pdf

Hopefully this post has been helpful. Best of luck - Arco
 
M

Muggy-Man

Well-Known Member
i have the stock battery strap and strap hold down with the aluminum piece you put the pin through. are these the parts you need ?
 
You must log in or register to reply here.
Top