Little help with Thunder Tech Aggressor Steering System

[ReaperGN]

Recently got a Clod and it has the Thunder Tech Aggressor Steering setup on it. It works well but the servo mount seems to flex quite a bit. I am only running a Hitec 645mg but I would like to install a Savox 0251 (222 oz). With the way things are that servo may be to much for the mount to handle. If anyone knows a way to reinforce it please let me know.

 

[mugen69]

You can use the ZRP Racing servo moun. The aluminum is much thicker should do the trick.

 

[ReaperGN]

I will look into that. I ended up using a turnbuckle to limit the flex. There is a hole on the front of the mount for something so I mounted a plastic servo mount to the axle as a anchor point and put a turnbuckle between the two. It seems to limit the flex so far.