Jugg/TXT Steering Lockout

[Supreme Reign]

Mike, stop hiding these beauties already. I need the lockout for My Jugg. I also need enough of the upper and lower link mounts to do the whole truck, or does that standard with the kit?
Yes, I will be mounting my shocks directly to the upper link mounts/standoffs). No link-mounted shocks here.

Rear Lockout

 

[DEVASTATOR]

I don't make any upper link mounts for the TXT, only the lower ones. I'm trying to get caught up right now so I need some time here too. Can you e-mail me at [email protected] and we can talk about what all you need?

 

[FlashGordon1]

Mike I have another question for you about your product. Would this work with a set of after market steering knuckles? Namely the ones from hot racing?
http://www.hot-racing.com/index.cgi?partnumber=CB2108;c=140

 

[DEVASTATOR]

The rear lockout *could* work with those. They would work if the arms and holes line up exactly in the same area as the stock knuckles. However, if they do not, I could make different length arms on my lockout that would accomodate them. You would have to send me the knuckles though. Two reasons: 1. so I could accurately make the new arms to fit. 2. Shims or washers may be needed if the arms are offset higher or lower than the stock plastic arms.

 

[FlashGordon1]

The rear lockout *could* work with those. They would work if the arms and holes line up exactly in the same area as the stock knuckles. However, if they do not, I could make different length arms on my lockout that would accomodate them. You would have to send me the knuckles though. Two reasons: 1. so I could accurately make the new arms to fit. 2. Shims or washers may be needed if the arms are offset higher or lower than the stock plastic arms.

Ok,I will take care of that soon. With school being around the corner. I have to get everything. Just PM me your mailing address. And the price. Also I will need two lower blocks for my rear axle. If you could. Could you add three holes on them,instead of one hole. At this time. I have a set of Mike Hesse's blocks. Just in-case if I need to adjust the toe of the axles like the clod.

 

[FlashGordon1]

I am giving an update. Starting to take both txt axles apart. I am going to paint both axles! I am going to try to send them out on monday.

 

[DEVASTATOR]

It's great to get started on things

 

[rocpede4x4]

Sweet lock out and how much do you sell them for.

 

[DEVASTATOR]

You have a PM

 

[FlashGordon1]

Mike please check your email as soon as you can please.

 

[FlashGordon1]

Mike please check your email as soon as you can please.

Going out today!

 

[FlashGordon1]

Mike
I just would like to inform you that I got the rear lock out kit ;-) ;-) WOW! However,I do have a question to ask tho! What's the masking tape for????

 

[DEVASTATOR]

I got your PM and replied. Glad you like the lockout. It should work perfect for what you need. Thanks again!