Install CPE planetary hubs?

[Manfjourde]

How do the planetary hubs install? Will I need to drill anything?

Also, can anyone post a pic of the purple beadlock rings that CPE does or just the purple that is printed?

 

[TXT-2.0]

the purple rings are colored from the start and the hubs just screw on to your stock stub axles ... you can take the nuts out and put on barrel nuts like i did

i heated up the nut and pulled it out and heated the barrel nut and pressed it back in with some shoe goo to help hold it .


IMG_20130901_144416_zps75b35624 by TXT-2.0, on Flickr


IMG_20130901_144422_zps80325d2c by TXT-2.0, on Flickr

 

[Manfjourde]

Thanks Tom, that's what I wanted to see. I wish there was a reverse side pic on the site for reference.

 

[SixtysGuy]

Thanks for the pic, I was wondering how they worked as well. So how do you tighten them?

 

[TXT-2.0]

Thanks for the pic, I was wondering how they worked as well. So how do you tighten them?

with your fingers and some blue loctite , getting them off is not the easiest but if you want the scale look ....

 

[SixtysGuy]

Thanks for that. It would be cool if a male thread could be attached under the 4mm lock nut and then the hub would screw onto that. Having said that I'm not really into scale that much, I was just interested to know how they mounted.