Ground pounder custom parts?

[william g]

Brett,
Are there going to be parts like sway bar kits and other goodies available down the road?

I know you mentioned machined shock-link axle mounts.

I'm hoping for a 32 pitch spur gear option?

So far I have only driven mine indoors. We practicly have huricane weather outdoors. Last night was wild here on aquidneck island.

My ''Tad Brace'' is installed. I stole the crossbar to make it from the rear, replaced it with threaded rod and aluminum tube.

 

[cpe mt]

We have a full race chassis for the truck coming hopefully in January that's currently being machined. We'll also have machined lower shock/link mounts pictured below shortly:

 

[chromethunder]

Hey Brett, can you give us some info on what the race chassis will look like?

 

[cpe mt]

It will be a low-CG chassis loosely based around our Terminator chassis. It will retain most of the stock truck to make it easier for people to just swap existing parts to the new chassis.

 

[chromethunder]

Sweet! Thanks for the info Brett! Im looking forward to ordering my GP tonight :tmb

 

[cpe mt]

Check out our Holiday sale thread as that's the cheapest you'll find a Ground Pounder anywhere. plus we also have a full selection of replacement parts if needed. Thanks!

 

[chromethunder]

Yeah i was buying it from you Brett :tmb

 

[cpe mt]

Thanks for your support!

 

[chromethunder]

No problem! Looking forward to the race chassis too if its a reasonable price, which i see it having no problem being!

 

[chromethunder]

Hey Brett, also, what color will the race chassis be?

 

[cpe mt]

The 1st ones will be aluminum, and probably silver (unpainted) rather than the blue anodize. Will also be looking at a carbon version down the road. Thanks!

 

[chromethunder]

Sweet, i was kinda hoping they wouldnt be the blue.

 

[william g]

No problem! Looking forward to the race chassis too if its a reasonable price, which i see it having no problem being!

If you do and want to sell the stock chassis I'd like first dibs :wnk I want to pick one up for a RCMT project I have in mind.

 

[chromethunder]

Will do :tmb

 

[Ma Monster]

Tad Bar

As an aftermarket item, you should produce a "Tad Bar" for the tranny give the problems some people are having. It's a great truck save this one error. The machining should be simple. You have all the specs and tolerances. Think about it.

 

[PestControl]

Oh dont worry, It is all in the works as we speak. Just gotta be patient....:minigun......:tong

 

[kelynsdad1023]

We have a full race chassis for the truck coming hopefully in January that's currently being machined. We'll also have machined lower shock/link mounts pictured below shortly:

are the shock mounts available yet ?

 

[Brian34]

Yeah, I will be needing these at some point in the near future; my factor mounts are starting to warp and bend a bit.

 

[cpe mt]

We're expecting the shock mounts to be available around February 8th. Thanks!

 

[cpe mt]

Website updated with expected arrival dates for some of the aftermarket parts.

We also have an upgraded link for the axle that is much stronger than the production version. It is a 1/4" thick seamless 6061 tubing, and angled at each end to provide clearance around the differential. These are available on our website here.