does anyone no where i could get spacers for txt wheels

[ballistictruck]

i just bought txt wheels for my clod an was wondering were i could get some spacers or wheel widners for them?

 

[TXT-2.0]

well you need the txt stub axles http://cgi.ebay.com/Tamiya-TXT-1-Rear-Stub-Axles-58280-/200541633466?pt=Radio_Control_Parts_Accessories&hash=item2eb1367bba#ht_1458wt_905
and the wheel hubs are pretty available on ebay here are some nice aluminum ones http://cgi.ebay.com/Aluminum-Wheel-Drive-Adaptor-Tamiya-TXT-1-Clodbuster-/110343460678?pt=Radio_Control_Vehicles&hash=item19b0fb9746#ht_1650wt_905

wideners i would suggest RC4WD

 

[cpe mt]

Or you can just use the Clod drive hubs and not worry about needing the TXT stub axles. If you do use the stock Clod drive hubs, a spacer like we sell would work with the TXT wheel.

You can also use a RC4WD style widener, again without needing to switch to the TXT stub axle.

 

[ballistictruck]

Or you can just use the Clod drive hubs and not worry about needing the TXT stub axles. If you do use the stock Clod drive hubs, a spacer like we sell would work with the TXT wheel.

You can also use a RC4WD style widener, again without needing to switch to the TXT stub axle.

dont you have to drill the cpe spacer, but i couldnt find spacer on RC4WD or wheel widners

 

[william g]

dont you have to drill the cpe spacer, but i couldnt find spacer on RC4WD or wheel widners

http://store.rc4wd.com/Aluminum-Wheel-Hub-Widener-for-Clod_p_188.html

 

[ballistictruck]

http://store.rc4wd.com/Aluminum-Wheel-Hub-Widener-for-Clod_p_188.html

i finaly got my wheels went to order my wideners an guess what out of stock i dont think ill ever get them on the truck,
crap, anyone got some used ones
thanks brant

 

[ClodMonster]

i finaly got my wheels went to order my wideners an guess what out of stock i dont think ill ever get them on the truck,
crap, anyone got some used ones
thanks brant

Does CPE sell them?

 

[metalicagod]

bret's or any similar style should work. all you need to do is drill the holes and remove the rest of the hub.

 

[ZRP_Racing]

I think Thundertech Racing has 3/4" ones in stock.

http://www.thundertechracing.com/onlinestore/proddetail.php?prod=DEL-CB01

 

[ballistictruck]

wideners

wow those are exspensive

 

[monsterjamman24]

I have both the rc4wd ones and the thunder tech ones, there almost exactly the same other then one is aluminum and one is not.