CPE-BEAD3: Clodbuster Plastic Beadlock Wheel Set

[Supreme Reign]

Only $129.99 for a set of 4.
-ABS-like plastic design (wheels & beadlock rings available in custom colors)
-Weight per wheel (with rings & hardware installed: 5.5 ounces
-Standard 12mm drive hex
-Designed with a 3/4" offset versus stock Clodbuster wheels
-Wheels are 1/4" narrower versus stock Clodbuster wheels
http://www.crawfordperformanceengineering.com/product_info.php?products_id=663

​

 

[northerngames]

there's a reason wheels are center mounted in the middle on most applications.

any angle landing and it's going to be pretty harsh on the axle ends I would think and have some added pull on the outer wheel in turns too.

 

[Bane75]

I'll wait for someone to do some durability testing.

Sent from my GT-P5113 using Tapatalk

 

[william g]

negative nanny's

I'm just happy there is another option to choose from

 

[Brian34]

I'll put this here too; I'm curious, in comparison with a stock clod wheel, the different offset of this wheel, what does that do to the position of the wheel/tire ? Brett, do you have a picture ?
Also, Brett, you say to heat up a stock clod tire to stretch it over this wheel. I see that the wheel is 1/4" narrower then a stock clod wheel. I was able to stretch a stock clod tire over an Ofna monster wheel, without too much challenge. So, I wonder if putting a stock clod tire on this wheel, would be all that hard to do..

 

[william g]

Brian I believe that heat was mentioned because of any possible whinners. Remember, there are some people who expect parts to ''self assemble'' themselves.

He's basically covering his backside

 

[Brian34]

Good to know.

 

[joe]

Looks pretty cool to me!

 

[Tad]

I just ordered a set so I will do a review as soon as they get here. The offset is a must because the bead lock ring will hit the stock knuckle. The RC/4wd bead lock wheels have the offset built into them just like these.

 

[Brian34]

I just ordered a set so I will do a review as soon as they get here. The offset is a must because the bead lock ring will hit the stock knuckle. The RC/4wd bead lock wheels have the offset built into them just like these.

I look forward to hearing back here, from you, about this. I have new steering knuckles on my GP, that allow direct mounting of clod tires/wheels. I use a set of the Clodbuster hub hockey pucks that interface with the stock clod wheels. I was just looking at these wheels again, and noticed, if I used them, they'd be direct bolt up, not needing the hub hockey pucks.. I'm gonna think about these, they do look really good.

 

[Tad]

These wheels should wrk on the gp with the stock knuckles. The built in spacing should clear I know my rc4wd ones clear the stock gp knuckles.

 

[Monstergirl74]

I want these stupid money. Why can't I have more of you?

 

[RCBuilder]

I want these stupid money. Why can't I have more of you?

Lol

Can you get them with blue beadlock rings?