Our long-awaited introduction of our 2.2 aluminum beadlock wheels is finally here! We're proud to introduce our brand new Razorback and Rock Stopper 2.2 aluminum beadlock wheels!
For a limited time either of these wheels will be $110 plus $10 shipping w/confirmation to any US address. Paypal can be sent to: [email protected].
Razorback Wheels:
Rock-Stopper Wheels:
These wheels are a direct fit for any axle using a 12mm drive hex, and fit all brands of 2.2 sized tires. Designed as direct replacements, you will not have to trim your drive hubs for full engagement, and their 7.1 oz weight eliminates the need to add your own wheel weights. These wheels also retain the use of the stock wheel washers used on AX-10 and the Wheely King. Both the inner and outer rings are designed with chamfers to ensure the sidewalls aren't damaged when folding over onto the beadlock. Our narrow 1" design provides more tread wrap, increasing ground clearance and sidehill traction.
We've listed the axle widths below for some of the more popular axles available. Each measurement listed was taken from the edge of the tire treads. The outer edges of the actual beadlock rings are approximately 5/8" narrower than what's listed.
Sold in sets of 4, each set will include 4 aluminum wheels, 4 anodized outer locking rings, 4 anodized inner locking rings, and 48 #4-40 stainless steel button head cap screws. As with all of our machined parts, these are made proudly in the US.
Note: Due to the varying tire rubber compounds and bead designs, some tires will be more difficult than others to install. Patience is a virtue when installing tires on beadlock wheels!
Wheel Specifications:
Width (wheel only): 1?
Width (wheel & rings): 1-1/4?
Assembled weight: 7.1 oz. (per wheel)
Drive hex: 12mm
Wheel Offset (measured from inner face): 3/16?
AX-10 overall axle width: 9-3/4"
Berg overall axle width: TBD
Clodbuster overall axle width (Using stock axles): 11-7/8"
CR-01 overall axle width: TBD
TLT overall axle width: TBD
Wheely King overall axle width: 10-3/4"
For a limited time either of these wheels will be $110 plus $10 shipping w/confirmation to any US address. Paypal can be sent to: [email protected].
Razorback Wheels:
Rock-Stopper Wheels:
These wheels are a direct fit for any axle using a 12mm drive hex, and fit all brands of 2.2 sized tires. Designed as direct replacements, you will not have to trim your drive hubs for full engagement, and their 7.1 oz weight eliminates the need to add your own wheel weights. These wheels also retain the use of the stock wheel washers used on AX-10 and the Wheely King. Both the inner and outer rings are designed with chamfers to ensure the sidewalls aren't damaged when folding over onto the beadlock. Our narrow 1" design provides more tread wrap, increasing ground clearance and sidehill traction.
We've listed the axle widths below for some of the more popular axles available. Each measurement listed was taken from the edge of the tire treads. The outer edges of the actual beadlock rings are approximately 5/8" narrower than what's listed.
Sold in sets of 4, each set will include 4 aluminum wheels, 4 anodized outer locking rings, 4 anodized inner locking rings, and 48 #4-40 stainless steel button head cap screws. As with all of our machined parts, these are made proudly in the US.
Note: Due to the varying tire rubber compounds and bead designs, some tires will be more difficult than others to install. Patience is a virtue when installing tires on beadlock wheels!
Wheel Specifications:
Width (wheel only): 1?
Width (wheel & rings): 1-1/4?
Assembled weight: 7.1 oz. (per wheel)
Drive hex: 12mm
Wheel Offset (measured from inner face): 3/16?
AX-10 overall axle width: 9-3/4"
Berg overall axle width: TBD
Clodbuster overall axle width (Using stock axles): 11-7/8"
CR-01 overall axle width: TBD
TLT overall axle width: TBD
Wheely King overall axle width: 10-3/4"
Last edited:
