Site Related: Clod wheels on juggernaut problem.

rocpede4x4

rocpede4x4

Well-Known Member
I went to switch my juggernaut wheel/tires to clod wheels/tires the other day. The clod wheel are really lose, compared to the juggernaut wheels. Everything lines up and the wheel nut is tight. I put 4 traxxas shims between the clod wheel and the wheel nut. It helped a little, but they are still lose. Has this happened to anyone before. I checked everything on the knuckles and bearings are brand new and the spacers are on the outer stub axle.. Any ideas?

Sent From My 2500 HD Tapatalk 2
 
Arcocustom

Arcocustom

Well-Known Member
I think the center thickness of the wheels may be different. **edit** I just checked and the Jugg wheels have an extra shoulder in the center that the Clod wheel does not.

TXT & Clod stub axles are also a different length.



The wheel hubs are different thickness too. I run an HPI Super Star Washer (#6125) behind the wheel nut on the Clod wheels & hubs when running them on my TXT.
http://www.ebay.com/itm/NEW-HPI-Racing-Washer-Set-Super-Star-Wheel-4-6125-NIB-/331203590687?pt=Radio_Control_Parts_Accessories&hash=item4d1d45ba1f

Axial (#AXA1090)makes a black version of the same thing.
http://www.ebay.com/itm/Axial-Racing-AXA1090-Washer-4-8x14-Black-10-/131301446513?pt=Radio_Control_Parts_Accessories&hash=item1e922d1371



Hope this helps. - Arco
 
Last edited:
You must log in or register to reply here.
Top