kjr2
Old Timer
Once you are in the User CP, look at the left column. There will be a tab called Edit Options. Click that one. You will see several things you can modify to your liking.
Look for the heading Thread Display Options. There will be 3 boxes to check under that area. "show signatures", "show avatars", and "show images". You should check all three for the best rcmt experience!!!!!!
Look for the heading Thread Display Options. There will be 3 boxes to check under that area. "show signatures", "show avatars", and "show images". You should check all three for the best rcmt experience!!!!!!
jagg
Well-Known Member
Yep, that worked. Still have to go through and fix up a few things, but man it's good to be back. I have to wait til the home PC is working right to get the latest pics up. Basically down to the body and wiring now. Tore the diffs apart over the weekend and got the bearings installed and locked both diffs with JB. Mounted both HS-645 servos, still need to do minor adjustments. Adj. motor mounts and 9 tooth pinions came in from highster, got those and the motors mounted waiting to get wired.
jagg
Well-Known Member
The servo regulator gimbal talked about came in today, so odds could be good for Sunday. I have to re-do the BTA steering, it's too close to the motor. Just need to move the servo back I hope. Going to have to use a stock stick pack for now, but should be fine for testing.
Last edited:
jagg
Well-Known Member
Got my adapters and wideners in from Junfac, took about 7 days. Not bad from South Korea. I did get dinged an extra $12.00 for duty, but they are worth it. I also got the RPM Stabilmaxx Spider wheels in. Now that I look at it, I have too many parts for this truck. Going to have to start another one I guess :willy .
Last edited:
jagg
Well-Known Member
As soon as the home PC is fixed. I have a few new ones of the mounts and steering ....... :drool
I do have a question for Gimbal, or anyone for that matter. With the parallel axle braces I made. Would I not be able to add weight to the bottom of these. Instead of the wheels or hubs. Basically sit over the axle but not adding direct weight onto the tube. Basically reducing the stress put on the axle tube.
I do have a question for Gimbal, or anyone for that matter. With the parallel axle braces I made. Would I not be able to add weight to the bottom of these. Instead of the wheels or hubs. Basically sit over the axle but not adding direct weight onto the tube. Basically reducing the stress put on the axle tube.
jagg
Well-Known Member
OK, so here's a few pics. The adj. motor mounts and 9 tooth pinions from Highster(thanks again):willy
Got them all mounted to the motors and installed in the cases.
And a quick set up of the BTA steering up front.
And rear steer with the parallel braces also.
Sadly I haven't made much more progress lately. Too much home stuff going on with the hollidays. But I'll update as it goes.
Got them all mounted to the motors and installed in the cases.
And a quick set up of the BTA steering up front.
And rear steer with the parallel braces also.
Sadly I haven't made much more progress lately. Too much home stuff going on with the hollidays. But I'll update as it goes.
*78bronco*
Member
thats a sweet project, is it gonna flex really good with the axle mounted right to the piece of metal your using for a chassis? i'm just wondering