i was out driving my clod and i had a lose wheel so i shut it off went in and fixed it then went out to drive it and the esc wont turn on it kinda gets warm like when its on but the light doesnt light up and when its on and you try to drive it you have nothing i dont know what the problem could be its wired up to 1 battery??? what could it be??
14.4v evx esc
- Thread starter shane77
- Start date
CPH extreme
Well-Known Member
what TX are you using?
I had same problem when i was using a Traxxas TQ , i had throttle trim too far out of adjustment and ESC wil not work no throttle no steering , It just out right acted like dead batt...hope this helps
Jeff
I had same problem when i was using a Traxxas TQ , i had throttle trim too far out of adjustment and ESC wil not work no throttle no steering , It just out right acted like dead batt...hope this helps
Jeff
I had the same problem when I had my 1/6 chevy..I was using the rc4wd 2.4 ghz radio and the green light would come on and then go off when you let go. It also happened to me with my xl-5 blue using the traxxas tq. Changed the radio to a hitec and it doesn't do it anymore, but I think it's just some kind of fail safe because it got to hot.:tmb
well i will try my throttle trim but i unpluged my servo and it worked fine but as soon as i plugged my servo in it shut off?? the servo works in my WK fin but not in that so i had a losi high roller layin arround that had a servo on it and i pluged it in and it worked fine??? oh and im using a traxxas tq3 reciver but im just using a traxxas tq controler it always worked with that combo just fine