1/18 TLT performance chassis & hop ups

offroadford4x4

Senior Member
Penguinr/c P2300 Performance Chassis

The Penguinr/c P2300 Performance Chassis is currently the most advanced lightweight chassis availible for the TLT-1. This chassis improves the stock TLT-1 reducing weight, increasing the ground clearance, lowering CG, increases articulation, improves electronics placement, and reduces drivetrain bind.


http://www.penguinrc.com/products/tamiya/p2300.html


Penguinr/c P2300r Performance Chassis

The Penguinr/c P2300r Performance Chassis is currently the most advanced lightweight chassis availible for the TLT-1. This chassis improves the stock TLT-1 reducing weight, increasing the ground clearance, lowering CG, increases articulation, improves electronics placement, and reduces drivetrain bind. The P2300r is a revision to the original P2300. This revision allows the use of a Gear Transmission in the TLT-1 to improve climing capabilities.


http://www.penguinrc.com/products/tamiya/p2300r.html


Penguinr/c P2300rGB Magnum Gearbox upgrade kit

The Penguinr/c P2300rGB Magnum Gearbox upgrade kit converts your existing P2300 into a full spec P2300r chassis kit. The main difference to the P2300 via this upgrade is that the entire gearbox is replaced by a gear drive system adapted from Traxxas.


http://www.penguinrc.com/products/tamiya/p2300rgb.html


Tamiya TLT-1 Carbon Chassis

Features:

* 2mm thick Carbon Fiber
* 64g weight savings
* Multiple Cantilever mounts (Increases ride height)

Includes:

* Left and Right plates
* Assembly instructions
* (Enough to complete one truck)

Requires:

* TLT-1 RockBuster
* or TLT-1 Max Climber


http://www.tamiyausa.com/product/item.php?product-id=53729


Tamiya TLT-1 Alum Damper Linkage

Blue annodized aluminum damper linkage levers for the TLT-1 chassis. More durable than standard resin parts and blue finish adds to chassis appearance.


http://www.tamiyausa.com/product/item.php?product-id=53711


New Era Models Extended Chassis Side Plates

TLT106 details:
2.5mm thick aluminum1 inch (25mm) Longer wheel baselowered cantilever mounts for increased ground clearenceExtended Chassis Side Plates 2.5mm Aluminum Billet allows a stock configuration or 1.0 inch (25mm). Second position for cantilevers for more clearance. Pocketing makes it lighter and completes the look of a Monster Truck.

Note:
You can use a standard 7.2 volt flat battery pack.

REQUIRES:

TLT210XL dog bone to extend 1.0 inch


http://www.neweramodels.com/item.cgi?part_id=2218


New Era Models Extended dog bone (for above chassis)

TLT210XL details:
Extended dog boneFor use with our extended chassis number TLT106 only.


http://www.neweramodels.com/item.cgi?part_id=2219


New Era Models Adjustable wheelie Bar with Real Rubber Tires

TLT343 details:
Adjustable wheelie Bar for TLT-1 is designed with the proper geometry to actually stabilize the truck when the front wheels have been lifted. Real Rubber tires are included to control the landing and allow the truck to "ride" a wheelie. The wheels and axle are mounted to a CNC machined 6061-T6 Aluminum plate which attaches to the stock bumper holes.


http://www.neweramodels.com/item.cgi?part_id=2041


New Era Models Chassis Side Plates 2.5mm Aluminum Billet

TLT105 details:
Chassis Side Plates 2.5mm Aluminum Billet allows a stock configuration. Pocketing makes it lighter and completes the look of a Monster Truck. CNC machined on all surfaces to a high luster from 6mm 6061-T6 aluminum billet.


http://www.neweramodels.com/item.cgi?part_id=2038


Also for many more performance & hop ups parts by Tobee, Topcad, GPM, & Tamiya, take a look here.

http://www.rcmart.com/catalog/advanced_search_result.php?osCsid=769ff0ab4b34cb99d747a729528e0ce1&sort=1a&keywords=tlt&x=0&y=0
 
Last edited:
Top