Search results

  1. L

    Blaze's Trophy truck build!

    It looks good. I like it. How does it drive?
  2. L

    My 775 Titan Wheely King

    Video Finally Better late then never right? Took a couple short vids of it finally. I plan on gearing up slightly as it has plenty of torque and runs very cool. https://www.youtube.com/watch?v=qtVSSDtNuIE https://www.youtube.com/watch?v=8ycRgDqfQ4E
  3. L

    midnight mudder thread...Vids coming soon!!

    I'm going to try this weekend to start a new thread showing what is needed and how to install it. I pulled the assembled slipper from my old evader and installed it directly to the wk tranny. The only thing different is the addition of the threaded stud into the wk tranny output shaft...
  4. L

    midnight mudder thread...Vids coming soon!!

    I'm glad you got the slipper figured out. It's worked great for me.
  5. L

    midnight mudder thread...Vids coming soon!!

    What problem are you having installing the slipper? The threaded studs linked on my thread are incorrect, they are too short. Is that the problem? I need to do a thread with pics on how to do it.
  6. L

    My 775 Titan Wheely King

    @northerngames I'm not sure about the speed controller using one battery. The esc's bec is powered by one of the two batteries. If you plan on jumpering one of the battery leads you might burn up the esc if running higher voltage. I'll have to check my gearing, I ruptured a disk in my back...
  7. L

    Customized TXT-2 AGRIOS

    Very nice truck! Looks really clean. I've been using that two speed tranny in my Jugg2. I had to upgrade to the RR slipper assembly (that was before the revo slipper existed) and has been great. I run in first gear 95% of the time and only use second to do high speed runs to show off:)
  8. L

    EQR TXT Pounder.....Reborn!

    This comes directly from Castle Creations.. A high power capable brushless motor in electrical engineering and physics terms, has unlimited torque. A high power brushless motor?s limit to torque in an RC vehicle is not within the bounds of the motor itself so much, but rather falls on...
  9. L

    My 775 Titan Wheely King

    Glad I could help.
  10. L

    oshkosh t1500 4x4 airport fire and rescue

    So sorry to hear about the accident. I just found this thread and your work is amazing. Makes me realize how truly hack my builds are:o
  11. L

    My 775 Titan Wheely King

    I did not lube any part of the slipper assembly and it's worked great. If your using the stock wheely king spur I think that is your problem. If I recall that spur is extremely soft.
  12. L

    820 Sized Motor Jugg

    Yep, next weekend. Along with my 775 Titan powered wheely king.
  13. L

    820 Sized Motor Jugg

    I posted this on clodtalk a while back but wanted to share it here. 820 sized Dewalt motor, which is unbelievably powerful, fed buy a Novak super duty and 6s LiFe. I've measured over 1800 watts from this motor! CF side plates, servo mount and links. Old E-maxx tranny with steel idlers and 2...
  14. L

    My 775 Titan Wheely King

    I only use 2 screws to secure the spur to the slipper plate. I have almost no wobble in the spur and my mesh is consistant. After many runs the spur/pinion has no signs of wear. What spur are you using? I apologize again for linking to the wrong size set screws. I would be willing to buy them...
  15. L

    Black el toro loco wheely pounder

    That looks fantastic! Very nicely done.
  16. L

    My 775 Titan Wheely King

    Hmmm. I apologize If those were not the correct set screws. I had the parts already on hand when I did it and I was certain that those were the ones. My set screw is bottomed out in the shaft with blue threadlock. I tried using a screw at first and found that it constantly tightened the...
  17. L

    My 775 Titan Wheely King

    That's worth a try. I didn't need to experiment much because what I had on hand worked for me. From the center of the spur gear to the motor plate is 0.675"
  18. L

    My 775 Titan Wheely King

    No proplem. I'm all for stickies:D Do note though that as I stated earlier in the thread it does move the spur quite a ways from the motor plate. I'll get an exact measurement soon.
  19. L

    New Gunslinger

    That looks really good! Have you ran it yet?
  20. L

    My 775 Titan Wheely King

    http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCTS3&P=7 http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXAML5&P=7 http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDHJ9&P=7 http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXAML9&P=7...
Top