Members do not see advertisements
Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 11 of 11
  1. #1

    Default Repairing Old Clod


    Members do not see advertisements
    I know this is probably a long shot, I live in the Bowling Green Ky area and I am looking to get my old clod running again it has been in my parents attic for 15 years. Wondering if anyone on here had suggestions of where to take it to or where to start in checking it out to get it running again. Next time I am at my parents will try to get some pics and information about it.
    Using Tapatalk

  2. #2
    Join Date
    Oct 2008
    Location
    PA
    Posts
    262
    Follows
    0
    Following
    0

    Default

    Hello and welcome. I think it would be best to post a few photos first so we can see what you're working with. I dont think you need to take it anywhere for help, if you assembled the truck you will be more than OK getting it back into running condition. I would first disassemble the truck to clean everything and make sure the axles spin freely and the motors are good. This is also a good time to check for any broken parts that may need replacing. Then I would check out the electronics and make sure they are in working order. If still using the original manual speed control, I would upgrade to an electronic unit ASAP. Good news is they are much cheaper nowdays and a good dual motor ESC can be has for around $20-30.

    Good news is they are still making the Clod so all parts are available and pretty cheap. As I said it would be really helpful to post some photos, but you should have it back up and running in no time. If you have any other specific questions be sure to post back, there are many guys here who can give great advice.

  3. #3

    Default

    I am thinking I will try to fix it myself, I didn't assemble the truck I got it for Christmas when I was 6 or 7. Once I get it and get some pictures I will probably be turning to you guys for advice.
    Using Tapatalk

  4. #4
    Join Date
    Oct 2008
    Location
    PA
    Posts
    262
    Follows
    0
    Following
    0

    Default

    No problem, we're all happy to help. Must have been awesome getting that at 6-7 years old! I didn't even get my first real RC until I was 13 or so.

    Post up some photos and we'll help you figure it out. You'll get a much more satisfaction doing it yourself, and when anything breaks in the future you'll be able to fix it.

  5. #5

    Default

    Nice to see someone close with a clod. I am in Scottsville just south of BG. There is a hobby shop in BG but they don't have any clod parts. I need almost everything for a clod or I can point you in the correct direction on line when you find out what all you need.

  6. #6

    Default

    Thanks I may get a hold of you at some point, I talked to my dad the other day apparently he has decided to get it out and start messing with it. Will update this when something changes.
    Using Tapatalk

  7. #7

    Default

    Got the clod running again my 3 year old loved watching it drive around. Here are some pictures my mom painted the body about 25 years ago when I got the truck.
    IMG_2140.jpgIMG_2142.jpgIMG_2143.jpg
    Using Tapatalk

  8. #8
    Join Date
    Feb 2013
    Location
    Bloomington, Mn.
    Posts
    237
    Follows
    0
    Following
    0

    Default

    Looks like a nice original Clod. Pretty cool idea of pulling something like that out of the closet after 15 years. I have had a tendency to sell my stuff after it sits for too long. Really wish I would have started doing that a long time ago with my old nitro stuff, practically had to give that away. I dont see myself ever selling my Clod though. Keep up the updates. Kinda like the stockness of it. Does it have 4 wheel steering? If it doesnt maybe add that and a electronic esc down the road. Carbon Fiber Race Clods are fantastic but definitely something to be said about originals. I never had one.

  9. #9

    Default

    It does have 4 wheel steering, what would be the recommended esc? Planning on it staying fairly stock.
    Using Tapatalk

  10. #10
    Join Date
    Feb 2013
    Location
    Bloomington, Mn.
    Posts
    237
    Follows
    0
    Following
    0

    Default

    I still havent gone brushless yet on my Clod. I have a old Novak Super Duty brushed esc. Think this was considered one of the better options back in the day. Maybe could be found used on EBay but I wouldnt pay a ton for it. Others could help here but pretty sure Castle has a brushless esc that can run 2 brushed motors. Thought a SV3 could do it with motor limitations like 14 turn or higher and that esc is on EBay right now for $49.95 brand new (gonitrohobbies). Sure they have a higher end options also that wouldnt have motor restrictions and come with a cooling fan but not sure if there is any decent fast brushed motor options to warrant the nicer ESC.?. Guess if it is going to get heavy use over kill wouldnt hurt. I use to have a Novak Super Rooster that seemed to do the job running around outside but I ended up overheating it running it inside in my living room. Lots of brakeing and reversing.

  11. #11

    Default


    Members do not see advertisements
    A Novak super rooster is all you need for a ESC. Brushless is more expensive to get.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •