Members do not see advertisements

Radio Control Monster Truck Network FAQ

Here you can find answers to questions about how the board works. Use the links or search box below to find your way around.

About RCMT

Updated: November 16, 2012

Breaking away from another forum were R/C monster trucks were just a sub-catagory, RCMT was esablished as an independent site in 1997 by Matt H, this is the original Radio Controlled Monster Truck Network!

Misc. noteds to be added into the about section... Mike Eckenrode could give a better idea about the earliest time. I came on when RCMT first opened on it's own, about a month into it I registered. I was looking for updated steering for my ESP Clod and found RCMT very friendly and helpful. Not long after the original Juggernaut was released and I posted the first videos of it online. It took 2 gear sets to make. Traded it for a used USA-1 because at the time it was popular here and had huge aftermarket support here on RCMT. Things were going well here for a few years, but then we had a server issue and went to EZBoard and membership started dwindling and splitting off to smaller specific webpages. I took over in April of 2006 until Aug 2011. My first ''mission'' was to get us off EZ and onto a server we had more control of. That happened May 2006. I had our first fund raising raffle in June 2006. A red Tamiya Hilux in cherry shape and a coveted truck at the time. Looking back seems stupid now always looking for a cheap host server, they always let us down after the first year was up. That is where all the alternate domains come in, testing and moving while allowing what we had stay in service. That's about all I can give on the server and ownership side. Original moderators were Mike E Neil, aka Digger Matt V was an Aux admin Matt H owner Marcus was the USA1 guy and a mod I came on as a mod in 2001 We voted Orange Peadeanaut as a mod to help court younger guys who thought we were to ''Old'' I think Nick was 14 Couple years and I was made an Aux Admin when Matt V left

Terms of Use Agreement

Updated: August 03, 2011

This Agreement (the "Agreement") governs your access and use of the RCMT facilities, bulletin boards and service (the "Service"). In consideration for your right to access and use the Service, you and RCMT agree as follows:

1.  ACCEPTANCE OF TERMS

By clicking the "Complete Registration" button when when you sign up for an account, you agree to be bound by the terms of this Agreement and any modifications made to it in accordance with Section 19 below.

2.  THE RCMT SERVICE

The RCMT Service is an online application, enabling businesses and individuals to build, join and participate in customized and personalized discussion groups. You understand and agree that the Service is provided "AS-IS" and that RCMT assumes no responsibility for, among other things, (1) any service outages or interruptions (2) the unavailability of particular boards, features or services, (3) the inability to access the Service, (4) the failure or inability to post materials to the Service, (4) the deletion of materials posted to the Service or (5) the failure to store materials posted to the service.

3.  REGISTRATION

To take advantage of the Service's full capabilities users must register with RCMT. You may register at HERE. You may also register as a user by clicking on the "register" link on any RCMT screen, then clicking on the link that describes your age. If you choose to register, you agree that you will supply RCMT with the information requested in the registration process, ensure that the information supplied is accurate, and update the information as necessary to ensure that it remains accurate. Information supplied in the registration process, as well as other information provided to RCMT during your use of the Service is governed by RCMT's privacy policy that can be viewed HERE at any time. During the registration process, you will asked to provide a user ID and valid e-mail address. You will not be asked to select a password for your individual account. Your password will be e-mailed to the e-mail account you suppllied. You are solely responsible for maintaining the confidentiality of your password. You agree that anyone with whom you share your password will abide by this Agreement, and that you will be liable for the conduct of those using your account and password. You are encouraged to and may change your password at any time by visiting the My Profilemenu located on any of the RCMT screens. If you learn of any unauthorized use of your account or password, you agree to notify rcmt immediately by logging a support ticket at our Help Desk.

4.  CONTENT ACCESSIBLE ON THE SERVICE

The RCMT service contains a huge variety of information, data, messages, directions, computer programs, pictures, audio/visual works and other materials (the "Content") that users post. Please use caution and common sense when viewing RCMT communities. You understand and agree that any Content posted on the Service is the exclusive responsibility of the person who posted or uploaded it, and that you will be solely responsible for any Content that you upload, post, email or otherwise transmit via the Service. You acknowledge that RCMT is not responsible for, does not control, does not endorse and does not verify the Content posted to the Service or available through the service, and that it makes no guarantee regarding the reliability, accuracy, legitimacy or quality of any such Content. You agree that you will bear any and all risk of reliance on the accuracy, validity or legitimacy of such Content. Under no circumstances will RCMT be liable in any way to you for any Content, including, but not limited to, any errors or omissions in any Content or any loss or damage of any kind incurred as a result of the use of any Content posted or otherwise transmitted via the Service.
You acknowledge that RCMT does not pre-screen Content, but agree that RCMT shall have the right (but not the obligation) to access any board, and remove or restrict access to any Content on the Service in its sole discretion and without notice or compensation. Without limiting the foregoing, RCMT shall have the right to access any board and remove or restrict access to any Content that violates this Agreement or that RCMT believes is otherwise objectionable.
You acknowledge and agree that RCMT may preserve or disclose any Content if it reasonably believes disclosure is required by law or in the good faith belief that such preservation or disclosure is reasonably necessary to: (a) comply with legal process; (b) enforce this Agreement; (c) respond to claims that any Content violates the rights of third-parties; or (d) protect the rights, property, or personal safety of RCMT, its users and the public.

5.  LICENSE GRANTED TO RCMT

You grant RCMT the world-wide, royalty free and non-exclusive license to reproduce, modify, adapt, distribute and publish any Content you post/upload/contribute to the Service, for the purposes of displaying such information on RCMT's sites and for the promotion and marketing of RCMT's services. However, RCMT will not resell, attempt to resell, or otherwise convey these rights to any third party.

6.  USER CONDUCT

You agree to not use the Service to: (a) violate or solicit the violation of any applicable local, state, national or international law; (b) infringe the rights of any third party, including but not limited to intellectual property rights and privacy or publicity rights. (c) upload, post, email or otherwise transmit any Content that (1) is unlawful, threatening, abusive, tortious, defamatory, obscene, libelous, or invasive of another's privacy; (2) consists of instructional information on illegal activities, including, but not limited to, hacking, cracking, and phreaking; (3) violates or infringes in any way upon the proprietary rights of others, including, without limitation, copyrighted software, music, photographs, text, videos or artwork; (4) constitutes pornography, or sexual material of an obscene nature or that violates local, state or national laws; (5) is the private information of another such as their addresses, phone number, Social Security number or credit card number; (6) contains software viruses, Trojan horses or any other computer code, files or programs designed to interrupt, destroy or limit the functionality of any computer software or hardware or telecommunications equipment; or (7) you do not have a right to upload or post due to contractual or other legal obligation. (d) impersonate any person or entity, including, but not limited to, a RCMT official, message board leader (moderator), guide or host, or falsely state or otherwise misrepresent your affiliation with a person or entity; (e) forge headers or otherwise manipulate identifiers in order to disguise the origin of any Content transmitted through the Service; (f) interfere with or disrupt the Service, computer servers or boards accessible through the Service; (g) disseminate off-topic messages on boards promoting any product, service, web site, board or venture, or promote boards on the Service through unsolicited electronic mail messages to third parties.
If you do use the Service to commit any of the above, RCMT may, at its sole discretion. terminate your password, account (or any part of it) or ability to use the Service, and remove and discard any Content within the Service.

7.  CREATION OF FORUMS

In using the Service to create or make accessible a forum, you agree to use your best efforts to ensure that individuals posting Content to the board comply with Paragraph 6 of this Agreement, and agree to take action to remove or disable access to any Content on the board that violates Paragraph 6 of this Agreement.

8.  COMMUNITY-SUPPORTED PROGRAM

By signing up to be a registered user or moderator under the Community-Supported program, you agree to the following:
(a) You expressly understand and acknowledge RCMT's Disclaimer of Warranties under Section 13 below and that RCMT will not be liable for any damages under this Agreement pursuant to the Limitations of Liability in Section 14 below. You expressly understand and acknowledge that the pricing reflected in this program is based on the above limitations, and that the limitations in this Section 8(a) represent a reasonable allocation of risk for the parties.
(b) You expressly understand and acknowledge that any fees due or paid by you under the COMMUNITY-SUPPORTED program are non-refundable in part or in whole. RCMT currently accepts payment only by PayPal, and reserves the right to modify its acceptable forms of payment at any time without notice.
(c) You expressly understand and acknowledge that RCMT may change your privileges as a user or administrator of the COMMUNITY-SUPPORTED program and that RCMT reserves the right at any time and from time to time to modify or discontinue, temporarily or permanently, the COMMUNITY-SUPPORTED program (or any part of it) with or without notice. You acknowledge that RCMT shall not be liable to you or to any third party for any modification, suspension or discontinuance of the COMMUNITY-SUPPORTED program.

9.  LIMITATIONS, CONDITIONS AND RULES REGARDING SERVICE

You agree that RCMT may establish, in its sole discretion, any limitations, conditions or rules concerning use of the Service, including, for example, the maximum number of messages a user may post to a given board or the Service in a given day, the number of days that posted messages will be available, or the maximum size of a given post. You acknowledge that RCMT has the right to change these general practices and limits at any time, in its sole discretion, with or without notice.

10.  MODIFICATION AND TERMINATION OF SERVICE

RCMT reserves the right at any time and from time to time to modify or discontinue, temporarily or permanently, the Service (or any part of it) with or without notice. You agree that RCMT shall not be liable to you or to any third party for any modification, suspension or discontinuance of the Service. You agree that RCMT, in its sole discretion, may terminate your password, account (or any part of it) or ability to use the Service, and remove and discard any Content within the Service, for any reason or for no reason, including, without limitation, for lack of use, or for violating the letter or the spirit of this Agreement. You agree that any termination of your access to the Service may be immediate and without prior notice. You further agree that RCMT shall not be liable to you or any third-party for any termination of your use or ability to access the Service. Specific reasons for such limitation or termination include, but are not limited to the following: (a) circumventing any RCMT banner display. Subscribers to our "no-ad banner option" are exempt from this requirement. All RCMT member boards must have a link to RCMT or its related directories. (b) using in the registration of your RCMT membership an email account that is not your own or that is or becomes inactive. (c) reproducing, distributing, republishing or retransmitting material posted by other RCMT members without the prior permission of such members. RCMT reserves the right to take any action it deems necessary with respect to your RCMT or user account if we have reason to believe it may cause us to lose the services of our ISP or suppliers.

11.  OTHER WEB SITES AND RESOURCES

Third parties using the Service may provide links or access to other web sites and resources. Because RCMT has no control over such sites and resources, you acknowledge and agree that RCMT is not responsible for the availability of such sites or resources, and does not endorse and is not responsible or liable for any content, advertising, products, or other materials on or available from such sites or resources. You further acknowledge and agree that RCMT shall not be responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such Content, goods or services available on or through any such site or resource.

12.  NO RESALE, REDISTRIBUTION OR REPURPOSING OF SERVICE OR CONTENT

You agree not to reproduce, duplicate, copy, sell, resell or exploit for any commercial purposes, use of the Service, access to the Service or any of the Content accessible through the Service, other than Content as to which you hold the intellectual property rights.

13.  DISCLAIMER OF WARRANTIES

YOU EXPRESSLY UNDERSTAND AND AGREE THAT: (a) YOUR USE OF THE SERVICE IS AT YOUR SOLE RISK. THE SERVICE IS PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS. RCMT EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. (b) RCMT MAKES NO WARRANTY THAT (i) THE SERVICE WILL MEET YOUR REQUIREMENTS, (ii) THE SERVICE WILL BE UNINTERRUPTED, TIMELY, SECURE, OR ERROR-FREE, (iii) THE INFORMATION THAT MAY BE OBTAINED FROM THE USE OF THE SERVICE WILL BE ACCURATE OR RELIABLE. (c) ANY MATERIAL DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE USE OF THE SERVICE IS OBTAINED AND USED AT YOUR SOLE RISK AND DISCRETION AND YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF ANY SUCH MATERIAL. (d) NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU THROUGH OR FROM THE SERVICE SHALL CREATE ANY WARRANTY BY RCMT.

14.  LIMITATION OF LIABILITY

YOU EXPRESSLY UNDERSTAND AND AGREE THAT RCMT SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF RCMT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE SERVICE; (ii) THE COST OF PROCUREMENT OF SUBSTITUTE GOODS AND SERVICES RESULTING FROM ANY GOODS, DATA, INFORMATION OR SERVICES PURCHASED OR OBTAINED OR MESSAGES RECEIVED OR TRANSACTIONS ENTERED INTO THROUGH OR FROM THE SERVICE; (iii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iv) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE SERVICE; OR (v) ANY OTHER MATTER RELATING TO THE SERVICE.

15.  EXCLUSIONS AND LIMITATIONS

SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF CERTAIN WARRANTIES OR THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCORDINGLY, SOME OF THE ABOVE LIMITATIONS OF SECTIONS 13 AND 14 MAY NOT APPLY TO YOU.

16.  EXCLUSIONS AND LIMITATIONS

You agree to indemnify and hold RCMT, and its subsidiaries, affiliates, officers, agents, employees, and contractors harmless from any claim or demand, including reasonable attorneys' fees, made by any third party due to or arising out of Content you submit, post to or transmit through the Service, your use of the Service, your connection to the Service, your violation of the law, this Agreement or the rights of another.

17.  NOTICES

Notices to you may be made via either email or regular mail. RCMT may also provide notices of changes to this Agreement or the Service by displaying notices or links to notices to you generally on the Service.

18.  NOTICES

This Agreement and your relationship with RCMT shall be governed by the laws of the State of Connecticut without regard to its conflict of law provisions. You and RCMT agree to submit to the personal and exclusive jurisdiction of the courts located within the county of Fairfield Connecticut, USA agree that regardless of any statute or law to the contrary, any claim or cause of action arising out of or related to use of the Service or the Agreement must be filed within one (1) year after such claim or cause of action arose or be forever barred.

19.  MODIFICATION

We may amend this Agreement at any time by posting the amended terms on our site located HERE. All amendments shall automatically be effective 30 days after they are initially posted on our site. Your use of the Service following the effective date of any modifications shall constitute your binding acceptance of those modifications. This Agreement may not be otherwise amended except in a writing signed by an officer of RCMT.

20.  GENERAL

This Agreement constitutes the entire agreement between you and RCMT with respect to the Service and supersedes all prior agreements and understandings between you and RCMT. RCMT's failure to enforce any provision of this agreement will not be construed as a waiver of any provision or right. In the event that a portion of this agreement is held unenforceable, the unenforceable portion will be construed in accordance with applicable law as nearly as possible to reflect the original intentions of the parties, and the remainder of the provisions will remain in full force and effect. Paragraphs 12, 13, 14, 15 and 17 of this Agreement shall survive any termination of the Agreement. You can have a copy of this Agreement emailed to you by making a request over at our Help Desk. This request should include your; user ID, actual name and address to mail the request of this agreement to.

21.  OFFICIAL LANGUAGE - ENGLISH

This AGREEMENT AND THE RCMT site is developed in English and MAY BE translated into other languages. TO THE EXTENT A TRANSLATION OF THE AGREEMENT OR THE SITE IS PROVIDED, IT IS AFFORDED AS a convenience only. For all purposes, only the English VERSION OF THIS AGREEMENT, AND THE ENGLISH VERSIONS OF THE RCMT SITE SHALL BE OFFICIAL AND BINDING ON THE PARTIES. RCMT is not responsible for the accuracy and correctness of the translation. You are solely responsible to carefully read AND UNDERSTAND the English text and YOU AGREE THAT YOU MAY NOT RELY on translations provided AS OFFICIAL DOCUMENTS OR REPRESENTATIONS.

Privacy Statement

Updated: August 03, 2011

Your privacy is of the utmost importance to RCMT. RCMT attempts to minimize the personal information that members need to reveal; however, we do ask for some basic personal information when creating a forum and or ID within the RCMT Community. We want you to be fully informed of how this information is gathered and used.

Some personal information is required in order to create a forum and or ID on RCMT. This information includes your email address that allows the RCMT server to route important messages to your existing email account. Forum notifications, RCMT newsletters, and messages sent to you all rely on the email address you provide when you signup. You have the ability to change your email address that is associated with your RCMT account at any time. RCMT will not disclose your email address to any RCMT member, or to any third party, without your permission with the exception of requests by legal authorities pending investigation of illicite activities whereby RCMT will fully co-oporate with them.

Other required information provides aggregate demographic data that we use to better understand the types of people using RCMT. This information allows us to do a better job of recommending content that may be of interest to you on RCMT, and to show you advertisements that are relevant to your age and geographic location. Similar to television, radio, and magazines, RCMT relies primarily on revenue from advertising to subsidize the cost of providing you with free services. To help enhance the relevance and effectiveness of ads, RCMT provides advertisers demographic information on an aggregate basis (not linked to your personal name or email address). For example, RCMT will report to advertisers that "45% of members are female and the average age is 28."

The above describes information that is provided "actively" - meaning, you choose to submit this information to us when you join RCMT, or update your account at any point after having joined. Some other information is provided "passively" - meaning, that RCMT obtains this information when you login to your RCMT account and use the service. This is done primarily through the use of "cookies". Cookies are used on RCMT to verify your login information, and to optionally store your password in your browser so that you do not need to type it in each time you visit RCMT. Any time that you point your browser to a 'members-only' area, RCMT checks your browser's cookie file to see if you have already logged in, and if you have, you're taken right to the page that you have requested. If not, you'll be directed to the RCMT login screen, where you can quickly and easily login to your account, or signup for a RCMT account if you are not yet a member. Cookies are also used in conjunction with some ad banners to determine their effectiveness.

When a user posts on RCMT, that user's IP (Internet Protocol) address number is collected by our software. Only users with administrative or moderation powers are given the option of using our "Display Poster/member's IP" feature, which causes the Internet Protocol (IP) address, from which the information was sent, to appear under the posting user's name in each post. RCMT does not routinely review this information. However, RCMT will observe and track user IPs when investigating complaints that a user has violated our Terms of Use or committed an illegal act through the use of our service.

RCMT has formed partnerships with other Web-based services, in the interest of bringing the highest quality services to you "under one roof". RCMT also requires from its partner sites the same level of respect and privacy for members' personal information that RCMT adheres to, and as a result will not redistribute any of your account information without your consent.

RCMT, as well as its partner sites, may send you email messages on a regular basis to keep you apprised of your membership status and inform you of new services available to you. Examples of this on RCMT include the personalized 'My RCMT' email, which shows you an overview of activity in your favorite RCMT message board, and the RCMT newsletter. If you create your own forum on RCMT, we may also email you traffic summary reports of your forum on a regular basis. Included in each of these messages are simple instructions on how to remove yourself from these mailings if you do not wish to receive them in the future. Our partner sites will also include similar instructions to be removed from their own regular mailings should you not wish to receive email correspondence from any of them as well.

RCMT does not routinely terminate user accounts, nor do we delete RCMT communities unless they continualy violate our policies and warning messages are disreguarded. If you no longer wish to use your account, simply let it go unused or you can delete it from the system from within "my profile". If you wish to remove your message board and its contents you can let it go unused and it will remain secure up to 90 days where upon it will be deleted for inactivity. If you no longer wish to receive emails from RCMT, you can turn off the ability to allow administrators and modertaors to send you e-mail noticies as well as the ability to keep your e-mail address viewable when you are posting through updating "my profile".

In this electronic era, when personal information can easily be obtained through various sources, RCMT appreciates the sensitivity of any private information that you disclose to us. It is our intention to treat your account information with the highest level of care. If you have further questions about our practices and policies with regard to how your account information is treated, please contact us at any time through our help desk.

RCMT works with a third party that serves ads to this site. These companies may use information (not including your name, address, email address or telephone number) about your visits to this and other web sites in order to provide advertisements about goods and services of interest to you. RCMT does not openly share, lease or rent this information with these advertisers. This information how ever can be collected by these third party advertisers once you leave the RCMT system.

Supporting Manufacturer Forums

Updated: January 17, 2014

RCMT.net offers ANY R/C company the ability to be a supporting manufacturer just by having their very own forum housed here on RCMT.
All you need to do is contact us through our Help Desk and we will start the process.

Note: This is YOUR forum. It will not be the job of the RCMT staff to police you forum unless you make a request to do so. If requested the RCMT staff will do their best, but our best advice is to let us know who within your organization you want to appoint as moderator(s). These individuals will then have the same controls as our staff, but limited to your forum. If for some reason an issue arises and a mutual agreement can not be worked out, then the issue is to be elevated to any RCMT staff. If you feel the issue demands a more serious approach then the owner of the site should be contacted directly. We are here for you and will do our best to support you in what ever it takes. All you need to do is ask :)

Classifieds Terms of use Agreement

Updated: Janruary 9, 2012

The Classifieds section is provided as a free online noticeboard for the posting of classified ads. No business links or business e-mail addresses are allowed. If you wish to advertise your business, please contact us.

RCMT.NET accepts no responsibility for adverts posted on this website. If you agree to purchase goods and/or services from any third party who posts a classified ad on the website, you do so at your own risk. The advertiser, not RCMT, is responsible for such goods and/or services and if you have any queries or complaints in relation to them, your only recourse is against the advertiser.

You agree that when posting or responding to a classified ad on RCMT you are bound by RCMT's Terms of Use Agreement. In particular but not limited to section 6 User Conduct.

Posting in the Buy/Sell/Trade forums requires you to be a member for at least 60 days or have made 60 posts.

As the seller you also agree to pay all applicable PayPal fees associated with the sale and NOT attempt to pass them on to the buyer. This is also against PayPal's policy.

Rules for posting images to the RCMT gallery

Updated: February 19, 2012

RCMT's Copyright and Intellectual Property Policy


Notification of Copyright Infringement

RCMT respects the intellectual property rights of others and expects its users to do the same. In accordance with the Digital Millennium Copyright Act ("DMCA"), the text of which may be found on the U.S. Copyright Office website at http://www.copyright.gov/legislation/dmca.pdf, RCMT will respond expeditiously to notices of alleged infringement that are reported to the RCMT site administrators through our HelpDesk.

Notices of Alleged Infringement for Content Made Available Through the RCMT Site.

If you are a copyright owner, authorized to act on behalf of one, or authorized to act under any exclusive right under copyright, please report alleged copyright infringements taking place on or through the RCMT.net website (the "Site") by completing the following notice ("Notice") and delivering it to a site administrator via our HelpDesk.

DMCA Notice of Alleged Infringement ("Notice") 1. Identify the copyrighted work that you claim has been infringed, or-if multiple copyrighted works are covered by this Notice-you may provide a representative list of the copyrighted works that you claim have been infringed.

2. Identify the material or link you claim is infringing (or the subject of infringing activity) and that access to which is to be disabled, including at a minimum, if applicable, the URL of the link shown on the MonsterMayhem website where such material may be found.

3. Provide your mailing address, telephone number, and, if available, email address.

4. Include both of the following statements in the body of the Notice:

* "I hereby state that I have a good faith belief that the disputed use of the copyrighted material is not authorized by the copyright owner, its agent, or the law (e.g., as a fair use)."

* "I hereby state that the information in this Notice is accurate and, under penalty of perjury, that I am the owner, or authorized to act on behalf of the owner, of the copyright or of an exclusive right under the copyright that is allegedly infringed."

5. Provide your full legal name and your electronic or physical signature.

Deliver this Notice, with all items completed, to the RCMT site administrators through our HelpDesk.

RCMT does not permit copyright infringing activities through its services and will, if properly notified that content infringes, remove or disable access to such content. RCMT reserves the right to remove or disable access to content without prior notice. In appropriate circumstances, RCMT will also terminate users whom it determines to be repeat infringers.

Counter Notices

A poster of allegedly infringing material may make a counter notice pursuant to Sections 512(g)(2) and 512(g)(3) of the DMCA. When RCMT receives a counter notice, it may reinstate the material in question. To provide a counter notice to us, please return the following form to the MonsterMayhem site administrators through our HelpDesk.

COUNTER NOTICE

1. Identification of the material that has been removed or to which access has been disabled on the RCMT service and the location at which the material appeared before it was removed or access to it was disabled:

2. A statement as follows: "I hereby state under penalty of perjury that I have a good faith belief that the material was removed or disabled as a result of mistake or misidentification of the material to be removed or disabled."

3. Your name, address, telephone number and, if available, email address:

4. I hereby consent to the jurisdiction of the Federal District Court for the judicial district of New Haven, Connecticut in which RCMT.net may be found, and I will accept service of process from the complaining party who notified RCMT.net of the alleged infringement or an agent of such person.

5. Your physical or electronic signature (full legal name):____________________________

The Counter Notice should be delivered to the RCMT site administrators through our HelpDesk.

Subpoenas

RCMT may be required to disclose information to individuals asserting rights under the DMCA. You hereby authorize RCMT to release information about you if required by law or subpoena, without notice to you.

You agree that you, and not RCMT, are responsible for any violations of any intellectual property rights in any content that you upload to the Site.

Notification of Trademark Infringement

If you believe that your trademark (the "Infringed Mark") is being used by a user in a way that constitutes trademark infringement, please provide RCMT's Copyright Agent (specified above) with the following information:

1. Your physical or electronic signature, or a physical or electronic signature of a person authorized to act on your behalf;

2. Information reasonably sufficient to permit RCMT to contact you or your authorized agent, including a name, address, telephone number and, if available, an email address;

3. Identification of the Infringed Mark(s) claimed to have been infringed, including (i) for registered Infringed Marks, a copy of each relevant federal trademark registration certificate or (ii) for common law Infringed Marks, evidence sufficient to establish the time period and geographic area in which the Infringed Mark has been used by you;

4. Information reasonably sufficient to permit RCMT to identify the use being challenged;

5. A statement that you have not authorized the challenged use, and that you have a good-faith belief that the challenged use is not authorized by law; and

6. A statement that the information in the notification is accurate and, under penalty of perjury, that you are the Infringed Mark owner, or are authorized to act on behalf of the Infringed Mark owner.

Upon receipt of notice as described above, RCMT will confirm the existence of the Infringed Mark on the Site, notify the Registered User who posted the Infringed Mark, and take whatever action, in its sole discretion, it deems appropriate, including removal of the Infringed Mark from the Site. A Registered User may respond to notice of takedown by showing either (a) that the Infringed Mark has been cancelled, or has expired or lapsed or (b) that the Registered User has a trademark registration, an unexpired license covering the use, or some other relevant right to the Infringed Mark. If the Registered User succeeds in showing either (a) or (b) then RCMT will not remove the Infringed Mark. If RCMT decides to comply with a takedown request, it will do so within a commercially reasonable time after receipt of the notice.

Notwithstanding the foregoing, RCMT will comply as appropriate with the terms of any court order relating to alleged trademark infringement on the Site.

Rights of Publicity and Use of Name or Likeness

RCMT respects the rights of individuals to exploit their own name, voice, signature, photograph or likeness and prohibits its users from posting Content that would otherwise misappropriate a third party's right of publicity. If you think that your right of publicity is being misappropriated as a result of the content on the Site, please provide RCMT's Copyright Agent (specified above) with the following information:

1. Information reasonably sufficient to permit RCMT to identify the Content containing your likeness;

2. Your name, address, telephone number and, if available, your email address;

3. A statement that you, or in the case of a minor, your parent or legal guardian, (the "Authorizing Party") has not authorized the challenged use, and that the use is not otherwise authorized by law; and

4. A statement that the information in the notification is accurate and, under penalty of perjury, that you are the Authorizing Party or that you are authorized to act on behalf of the Authorizing Party.

Upon receipt of notice as described above, RCMT will take whatever action, in its sole discretion, it deems appropriate, including removal of the challenged use from the Site, with notice to the Registered User in question, unless, prior to such removal, the Registered User in question sufficiently demonstrates that he or she has appropriate authorization or consent to use your likeness.

Notwithstanding the foregoing, RCMT will comply as appropriate with the terms of any court order relating to the behavior of the challenged party identified in such court order.

View our privacy policy here |

Rules for Ride of the Month Contest

Updated: January 29, 2013

Out side of the following rules all entries must also must abide by The Terms of Use Agreement of this site.

Rules subject to change and or altered for special themed contests. Please check back here for any alterations to these rules as this is the only place they will be posted. A link to these rules will be provided when the start of a contest is beginning.

1. Voting on Ride of the Month will be done by the members of The Radio Controlled Monster Truck Network. Each member will be allowed 1 vote. Membership is FREE!

2. To participate in the Ride of the Month Contest (entries and or voting) members must have a join date at least 30 days prior to the start of the current Ride of the Month Contest and have at least 3 valid posts within the forums.

3. The Ride of the Month Contest will begin 10 days prior to each month and end the day before the beginning of each new month.

4. Only the first 10 entries will be voted upon. Entries must be by the owner of the vehicle and in running condition.

5. Entries can not advertise a website and or business (sponsor decals to replicate an actual truck are permitted).

6. "RCMT" is a Monster Truck oriented site so entries that do not conform to the subject matter of this site will be ignored and or deleted.

All entries should be submitted as soon as possible when the contest starts. Only 1 entry per member per month. Please make sure your entry is a clear picture of a single vehicle.

When submitting entries please make sure they are placed in the current Ride of the Month category by selecting the proper drop down option (Hint: If you enter the current Ride of the Month category and upload from there, you will not need to select the proper category as your upload will default to the location you are in). Previous and upcoming months are locked.

Winners of the Ride of the Month contest will have the image of their truck placed on the front page of the RCMT.NET website along with an article as well as a link back to their personal gallery (if they have one). If the winner wishes other images of their winning entry to be used they will need/be asked to upload them to their gallery on this site.

Advertising on RCMT

Updated: July 08, 2012

Why advertise with RCMT?
    RCMT is the largest.
What type of banners does RCMT allow?
    MonsterMayhem provides a LeaderBoard sized banner (728X90) that is rotated and displayed just under our navigation menu. Banners are rotated based on each new screen that a user views and is displayed on all of our web pages in the same location. Each banner is weighted and given the same priority. We do not accept banners that are not industry related/specific.

    You can also send us multiple banners so that they can be rotated during the year (you must contact us each time you want to rotate to a new banner as it is a manual process) When the year is up we will hold banners in our database even if you do not wish to renew so that in the future if you want to reactivate your banner we will already have your account pre-configured.
What are the costs involved?
    Cost for a single banner (any format including flash) that runs 13 months: $100.00 (US funds - non-refundable)
    All Banner payments should be made through our Subscription System and not through the donation system.
For those that need an invoice you can down load a copy (MS Word 2007) here.

You will need to fill in:
  • Customer ID: (This is your user ID on MonsterMayhem - 2 instances)
  • Bill To: (This is your companies name/address)

    Please contact us for more information.

  • Servo Chart

    Airtronics
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    94161 Pro Large Scale BB 2.36 oz
    (67.0 g)
    0.79 x 1.54 x 1.65 in
    (20 x 39 x 42 mm)
    115/144 oz-in
    (9.7 kg-cm)
    0.23/0.18 sec
    @ 60 deg
    3 Pole, dual ball bearing $74.95
    94257 ERG-ZR High Speed Metal Gear BB 1.80 oz
    (51.1 g)
    0.79 x 1.54 x 1.38 in
    (20 x 39 x 35 mm)
    110 oz-in
    (7.9 kg-cm)
    0.06 sec
    @ 60 deg
    Coreless, aluminum gears $114.95
    94258 ERG-ZR High Torque Metal Gear BB 1.80 oz
    (51.1 g)
    0.79 x 1.54 x 1.38 in
    (20 x 39 x 35 mm)
    145 oz-in
    (10.5 kg-cm) 6v
    0.09 sec
    @ 60 deg 6v
    Coreless, aluminum gears $114.95
    94322 Precision Heavy Duty Dual Ball Bearing 1.59 oz
    (45.2 g)
    0.79 x 1.54 x 1.47 in
    (20 x 39 x 37 mm)
    46/58 oz-in
    (3.3/4.2 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 Pole, single ball bearing $24.95
    94357 ERG-VR High Speed Dual Ball Bearing 2.12 oz
    (60.2 g)
    0.79 x 1.54 x 1.47 in
    (20 x 39 x 37 mm)
    100/125 oz-in
    (7.2/9.0 kg-cm)
    0.09/0.07 sec
    @ 60 deg
    Coreless, aluminum gear $139.95
    94358 ERG-VB High Torque Dual Ball Bearing 2.12 oz
    (60.2 g)
    0.79 x 1.54 x 1.47 in
    (20 x 39 x 37 mm)
    160/200 oz-in
    (11.5/14.4 kg-cm)
    0.13/0.10 sec
    @ 60 deg
    Coreless, aluminum gear $139.95
    94359 ERG-VX High Torque Aluminum Heat Sink 2.19 oz
    (62.2 g)
    0.79 x 1.54 x 1.47 in
    (20 x 39 x 37 mm)
    160/200 oz-in
    (11.5/14.4 kg-cm)
    0.13/0.10 sec
    @ 60 deg
    Coreless, aluminum gear, heat sink $159.95
    94451 Pro Contest Heli & Airplane High Speed BB 1.94 oz
    (55.1 g)
    0.79 x 1.54 x 1.47 in
    (20 x 39 x 37 mm)
    88/110 oz-in
    (6.35/7.9 kg-cm)
    0.15/0.12 sec
    @ 60 deg
    Coreless, dual ball bearing $109.95
    94452 Pro Contest Heli & Airplane High Speed Dual Ball Bearing 2.08 oz
    (59.1 g)
    0.79 x 1.54 x 1.47 in
    (20 x 39 x 37 mm)
    77/96 oz-in
    (5.6/6.9 kg-cm)
    0.11/0.09 sec
    @ 60 deg
    Coreless $114.95
    94453 Pro Contest Heli & Airplane High Torque Dual Ball Bearing 2.08 oz
    (59.1 g)
    0.79 x 1.54 x 1.48 in
    (20 x 39 x 38 mm)
    99/124 oz-in
    (7.1/8.9 kg-cm)
    0.17/0.14 sec
    @ 60 deg
    Coreless, metal gears, dual ball bearing $114.95
    94731 Contest Heli & Airplane 1.80 oz
    (51.1 g)
    0.79 x 1.54 x 1.40 in
    (20 x 39 x 36 mm)
    77/96 oz-in
    (5.6/6.9 kg-cm)
    0.17/0.14 sec
    @ 60 deg
    Coreless, metal output gear, dual ball bearing $74.95
    94734 Contest Retract 1.73 oz
    (49.1 g)
    0.79 x 1.54 x 1.38 in
    (20 x 39 x 35 mm)
    73/91 oz-in
    (5.3/6.6 kg-cm)
    0.40/0.32 sec
    @ 60 deg
    5 Pole, metal output gear, dual ball bearing $63.95
    94737 Contest High Speed 1.94 oz
    (55.1 g)
    0.79 x 1.54 x 1.38 in
    (20 x 39 x 35 mm)
    56/70 oz-in
    (4.0/5.1 kg-cm)
    0.15/0.12 sec
    @ 60 deg
    Coreless, metal output gear, dual ball bearing $87.95
    94738 Contest High Torque 1.94 oz
    (55.1 g)
    0.79 x 1.54 x 1.38 in
    (20 x 39 x 35 mm)
    70/88 oz-in
    (5.1/6.4 kg-cm)
    0.20/0.16 sec
    @ 60 deg
    Coreless, metal output gear, dual ball bearing, watertight $74.95
    94739 Contest Proportional Retract 1.87 oz
    (53.1 g)
    0.75 x 1.46 x 1.38 in
    (19 x 37 x 35 mm)
    74/93 oz-in
    (5.3/6.7 kg-cm)
    0.42/0.34 sec
    @ 60 deg
    5 Pole, metal output gear, dual ball bearing, 170 deg $59.95
    94742 Contest BB 1.87 oz
    (53.1 g)
    0.75 x 1.46 x 1.38 in
    (19 x 37 x 35 mm)
    74/93 oz-in
    (5.3/6.7 kg-cm)
    0.42/0.34 sec
    @ 60 deg
      $44.95
    94743 Contest AP Standard 1.80 oz
    (51.1 g)
    0.79 x 1.54 x 1.38 in
    (20 x 39 x 35 mm)
    67/84 oz-in
    (4.8/6.1 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 Pole, nylon gears, dual ball bearing $44.95
    94751 Competition Digital Servo Aircraft 1.80 oz
    (51.1 g)
    0.79 x 1.54 x 1.40 in
    (20 x 39 x 36 mm)
    73/91 oz-in
    (5.3/6.6 kg-cm)
    0.16/0.13 sec
    @ 60 deg
    Coreless -?-
    94755 Competition Digital Servo 2.04 oz
    (58.0 g)
    0.79 x 1.54 x 1.40 in
    (20 x 39 x 36 mm)
    65/81 oz-in
    (4.7/5.8 kg-cm)
    0.14/0.11 sec
    @ 60 deg
    Coreless, Metal Output Gear -?-
    94757 Competition Digital Servo High Torque 2.12 oz
    (60.2 g)
    0.79 x 1.54 x 1.47 in
    (20 x 39 x 37 mm)
    92/115 oz-in
    (6.6/8.3 kg-cm)
    0.09/0.07 sec
    @ 60 deg
    Coreless, Metal Gears -?-
    94758 Competition Digital Servo High Speed 2.12 oz
    (60.2 g)
    0.79 x 1.54 x 1.47 in
    (20 x 39 x 37 mm)
    92/115 oz-in
    (6.6/8.3 kg-cm)
    0.07/0.06 sec
    @ 60 deg
    Coreless, Metal Gears -?-
    94921 Low Profile Dual Ball Bearing 1.69 oz
    (48.0 g)
    0.87 x 1.74 x 0.92 in
    (22 x 44 x 21 mm)
    56/70 oz-in
    (4.0/5.1 kg-cm)
    0.16/0.13 sec
    @ 60 deg
    Coreless $82.95
    94924 Low Profile Retract Dual Ball Bearing 1.60 oz
    (45.4 g)
    0.87 x 1.74 x 0.92 in
    (22 x 44 x 21 mm)
    77/96 oz-in
    (5.6/6.9 kg-cm)
    0.48/0.38 sec
    @ 60 deg
    Standard 5 Pole, switch type (non-proportional) $74.95

     

    Futaba
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    S148 Precision Standard (my favorite servo!) 1.6 oz
    (45.4 g)
    0.77 x 1.59 x 1.41 in
    (20 x 40 x 36 mm)
    44/57 oz-in
    (3.2/4.1 kg-cm)
    0.23/0.19 sec
    @ 60 deg
    3 pole, oilite bearing $14.99
    S3001 Standard Precision BB 1.6 oz
    (45.4 g)
    0.77 x 1.59 x 1.41 in
    (20 x 40 x 36 mm)
    44/57 oz-in
    (3.2/4.1 kg-cm)
    0.23/0.19 sec
    @ 60 deg
    3 pole, top ball bearing $24.99
    S3003 Standard 1.31 oz
    (37.2 g)
    0.78 x 1.59 x 1.42 in
    (20 x 40 x 36 mm)
    44/57 oz-in
    (3.2/4.1 kg-cm)
    0.23/0.19 sec
    @ 60 deg
    3 pole, top ball bearings $11.99
    S3004 Standard BB 1.30 oz
    (36.9 g)
    0.78 x 1.59 x 1.42 in
    (20 x 40 x 36 mm)
    44/57 oz-in
    (3.2/4.1 kg-cm)
    0.23/0.19 sec
    @ 60 deg
    3 pole, single top ball bearing $13.99
    S3104 1/4 Scale 3.3 oz
    (93.7 g)
    1.2 x 2.4 x 2.0 in
    (30.5 x 61.0 x 50.8 mm)
    126/NR oz-in
    (9.1/NR kg-cm)
    0.21/NR sec
    @ 60 deg
    3 pole, no bearings, watertight $34.99
    S3302 1/4 Scale BB Servo 3.60 oz
    (102.2 g)
    1.14 x 2.32 x 1.97 in
    (29 x 59 x 50 mm)
    89.2/110.0 oz-in
    (7.9 kg-cm)
    0.24/0.19 sec
    @ 60 deg
    5 pole motor, metal gear, water resistant $54.99
    S3401 Coreless BB 1.66 oz
    (47.1 g)
    0.79 x 1.60 x 1.47 in
    (20.1 x 40.6 x 37.3 mm)
    36.4/44.4 oz-in
    (2.6/3.2 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    5 pole motor, metal gear, water resistant $44.99
    S3801 Sail Arm BB 3.7 oz
    (107.9 g)
    1.2 x 2.4 x 1.97 in
    (30.5 x 61.0 x 50.0 mm)
    156.2/194.0 oz-in
    (11.3/14.0 kg-cm)
    0.33/0.22 sec
    @ 60 deg
    5 pole motor, arm type, metal gear, water resistant $69.99
    S3802 Sail Winch 2.60 oz
    (73.84 g)
    0.91 x 1.73 x 1.69 in
    (23.1 x 43.9 x 42.9 mm)
    122.2/153.0 oz-in
    (8.8/11.0 kg-cm)
    0.70/0.56 sec
    @ 60 deg
    arm type, metal gear $54.99
    S5301 High Torque Giant Scale 4.41 oz
    (125.2 g)
    1.2 x 2.4 x 1.96 in
    (30.5 x 61.0 x 49.8 mm)
    233/292 oz-in
    (16.8/21.1 kg-cm)
    0.29/0.23 sec
    @ 60 deg
    3 pole motor, all metal gear, dual ball bearings $94.99
    S5302 High Torque 1/4 Scale 4.41 oz
    (125.2 g)
    1.13 x 2.33 x 1.96 in
    (28.7 x 59.2 x 49.8 mm)
    189/236.0 oz-in
    (13.6/17.0 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    5 pole motor, all metal gear, dual ball bearings $94.99
    S5801 Sail Winch BB 2.90 oz
    (82.4 g)
    0.98 x 1.81 x 1.73 in
    (24.9 x 46.0 x 43.9 mm)
    108.8/136.0 oz-in
    (7.9/9.8 kg-cm) 6/7.2
    0.6/0.5 sec
    @ 360 deg 6/7.2
    5 pole motor, drum type, metal gear, water resistant $149.99
    S9001 Coreless BB 1.7 oz
    (48.3 g)
    0.78 x 1.59 x 1.48 in
    (19.8 x 40.4 x 37.6 mm)
    54.2/72.2 oz-in
    (3.9/5.2 kg-cm)
    0.22/0.18 sec
    @ 60 deg
    Coreless $44.99
    S9101 High Speed Coreless BB 1.5 oz
    (42.6 g)
    0.80 x 1.52 x 1.36 in
    (20.3 x 38.6 x 34.5 mm)
    34.1/42.7 oz-in
    (2.5/3.1 kg-cm)
    0.20/0.16 sec
    @ 60 deg
    Coreless, water resistant $59.99
    S9102 Wing Mount Aileron BB 1.6 oz
    (45.4 g)
    0.87 x 1.85 x 1.05 in
    (22.1 x 47.0 x 26.7 mm)
    40.0/50.0 oz-in
    (2.9/3.6 kg-cm)
    0.16/0.13 sec
    @ 60 deg
    Coreless, water resistant $89.99
    S5050 Digital High Torque Giant Scale 4.41 oz
    (125.2 g)
    1.2 x 2.4 x 2.0 in
    (30.5 x 61.0 x 50.8 mm)
    211.0/263.7 oz-in
    (15.2/19.0 kg-cm) @ 6V
    0.25/0.20 sec
    @ 60 deg @ 6V
    5 pole, watertight $109.99
    S9150 Digital Low Profile Aileron 1.87 oz
    (53.1 g)
    1.06 x 1.87 x 1.00 in
    (26.9 x 47.5 x 25.4 mm)
    80.5/NR oz-in
    (5.8/NR kg-cm)
    0.18/NR sec
    @ 60 deg
    coreless, special servo arm style, watertight $99.99
    S9151 Digital High Torque Rudder F3A 1.75 oz
    (49.7 g)
    0.75 x 1.60 x 1.50 in
    (19.1 x 40.6 x 38.1 mm)
    131.9/NR oz-in
    (9.5/NR kg-cm)
    0.19/NR sec
    @ 60 deg
    very precise F3A, dual ball bearings, watertight $99.99
    S9202 Coreless BB 1.8 oz
    (51.1 g)
    0.79 x 1.59 x 1.40 in
    (20.1 x 40.4 x 35.6 mm)
    76/98 oz-in
    (5.5/7 kg-cm)
    0.26/0.21 sec
    @ 60 deg
    Coreless $54.99
    S9203 High Speed BB 1.9 oz
    (54.0 g)
    0.79 x 1.59 x 1.48 in
    (20.1 x 40.4 x 37.6 mm)
    76.4 oz-in
    (5.5 kg-cm)
    0.11 sec
    @ 60 deg
    Coreless -?-
    S9204 High Torque BB 1.9 oz
    (54.0 g)
    0.79 x 1.59 x 1.48 in
    (20.1 x 40.4 x 37.6 mm)
    131.2 oz-in
    (9.5 kg-cm)
    0.19 sec
    @ 60 deg
    Coreless -?-
    S9205 Digital Heli Servo 1.90 oz
    (54.0 g)
    0.79 x 1.59 x 1.48 in
    (20.1 x 40.4 x 37.6 mm)
    76.4/NR oz-in
    (5.5/NR kg-cm)
    0.11/NR sec
    @ 60 deg
    high torque and speed, metal gears, watertight $99.99
    S9206 Digital Heli Servo 1.90 oz
    (54.0 g)
    0.79 x 1.59 x 1.48 in
    (20.1 x 40.4 x 37.6 mm)
    132.7/NR oz-in
    (9.6/NR kg-cm)
    0.19/NR sec
    @ 60 deg
    very high torque, metal gears, watertight $114.99
    S9250 Digital Heli High Speed 1.90 oz
    (54.0 g)
    0.79 x 1.59 x 1.48 in
    (20.1 x 40.4 x 37.6 mm)
    76.3/NR oz-in
    (5.5/NR kg-cm)
    0.11/NR sec
    @ 60 deg
    high torque and speed, metal gears, watertight $106.99
    S9251 Digital High Speed Rudder 2.0 oz
    (56.8 g)
    0.75 x 1.50 x 1.40 in
    (19.1 x 38.1 x 35.6 mm)
    51.4/NR oz-in
    (3.7/NR kg-cm)
    0.07/NR sec
    @ 60 deg
    coreless, metal gears, watertight $124.99
    S9252 Digital High Torque All-Purpose 1.75 oz
    (49.7 g)
    0.75 x 1.50 x 1.40 in
    (19.1 x 38.1 x 35.6 mm)
    91.6/NR oz-in
    (6.6/NR kg-cm)
    0.14/NR sec
    @ 60 deg
    watertight $109.99
    S9253 Digital High Speed Rudder 1.74 oz
    (49.4 g)
    0.75 x 1.50 x 1.40 in
    (19.1 x 38.1 x 35.6 mm)
    27.8/NR oz-in
    (2.0/NR kg-cm)
    0.08/NR sec
    @ 60 deg
    coreless, watertight $129.99
    S9254 Standard BB Digital 1.70 oz
    (48.5 g)
    0.75 x 1.60 x 1.40 in
    (19.1 x 40 x 35.6 mm)
    47/NR oz-in
    (3.4/NR kg-cm)
    0.06/NR sec
    @ 60 deg
    Dual ball bearing, nylon gears $109.99
    S9303 High Torque BB 2.3 oz
    (65.3 g)
    0.79 x 1.59 x 1.55 in
    (20.1 x 40.4 x 39.4 mm)
    99.0 oz-in
    (7.1 kg-cm)
    0.19 sec
    @ 60 deg
    Coreless -?-
    S9304 Coreless BB 1.8 oz
    (51.1 g)
    0.79 x 1.59 x 1.40 in
    (20.1 x 40.4 x 35.6 mm)
    56.4/69.5 oz-in
    (4.1/5.0 kg-cm)
    0.28/0.22 sec
    @ 60 deg
    Coreless, watertight $64.99
    S9402 High Speed High Torque BB 1.9 oz
    (54.0 g)
    0.79 x 1.59 x 1.48 in
    (20.1 x 40.4 x 37.6 mm)
    89.1/111.1 oz-in
    (8.0 kg-cm)
    0.13/0.10 sec
    @ 60 deg
    Coreless, metal gears, watertight $99.99
    S9403 Coreless BB 1.7 oz
    (48.3 g)
    0.79 x 1.59 x 1.40 in
    (20.1 x 40.4 x 35.6 mm)
    44.5 oz-in
    (3.2 kg-cm)
    0.16 sec
    @ 60 deg
    Coreless -?-
    S9404 Coreless BB 1.94 oz
    (55.1 g)
    0.79 x 1.54 x 1.47 in
    (20 x 39 x 37 mm)
    79.2 oz-in
    (5.7 kg-cm)
    0.11 sec
    @ 60 deg
    Coreless, alloy gear $114.99
    S9450 Digital High Speed Car 1.94 oz
    (55.1 g)
    0.79 x 1.59 x 1.48 in
    (20.1 x 40.4 x 37.6 mm)
    88.8/111.0 oz-in
    (6.4/8.0 kg-cm)
    0.10/0.08 sec
    @ 60 deg
    coreless, metal gears, watertight $129.99
    S9550 Digital High Speed Low Profile 1.55 oz
    (44.0 g)
    0.82 x 1.59 x 1.00 in
    (20.8 x 40.4 x 25.4 mm)
    66.6/83.3 oz-in
    (4.8/6.0 kg-cm)
    0.11/0.09 sec
    @ 60 deg
    coreless, metal gears, watertight $119.99

     

    Hitec
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    HS-225BB Ball Bearing 0.95 oz
    (27 g)
    1.27 x 0.66 x 1.22 in
    (32.4 x 16.8 x 31 mm)
    54.2/66.7 oz-in
    (3.9/4.8 kg-cm)
    0.14/0.11 sec
    @ 60 deg
    3 pole ferrite motor, ball bearing, oilite bushing $22.95
    HS-225MG Metal Gear 1.1 oz
    (31 g)
    1.27 x 0.66 x 1.22 in
    (32.4 x 16.8 x 31 mm)
    54.2/66.7 oz-in
    (3.9/4.8 kg-cm)
    0.14/0.11 sec
    @ 60 deg
    3 pole ferrite motor, metal gears, ball bearing, oilite bushing $29.95
    HS-300 Standard Servo 1.7 oz
    (47.1 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 37 mm)
    42/51 oz-in
    (3.0/3.7 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 pole, nylon bushing $14.95
    HS-300BB Economy Ball Bearing 1.75 oz
    (49.7 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 37 mm)
    42/51 oz-in
    (3.0/3.7 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 pole, Top Ball Bearing $20.95
    HS-303 Economy Servo 1.7 oz
    (48.5 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 37 mm)
    49 oz-in
    (3.5 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 pole, Nylon Gears, Nylon Bearings $17.95
    HS-311 Economical Standard 1.7 oz
    (45.2 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 36 mm)
    42.0/51.0 oz-in
    (3.0/3.7 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 pole, nylon bushings $12.95
    HS-322 Super Standard Sport 1.5 oz
    (43 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 37 mm)
    42.0/51.0 oz-in
    (3.0/3.7 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 pole, nylon bushing $9.95
    HS-322HD Standard Heavy Duty 1.5 oz
    (43 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 37 mm)
    42.0/49.0 oz-in
    (3.0/3.4 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 pole, nylon bushings $9.95
    HS-325BB Super Servo 1.7 oz
    (48 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 37 mm)
    42.0/49.0 oz-in
    (3.0/3.4 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 pole, top ball bearing $12.95
    HS-325HB Heavy Duty Ball Bearing 1.7 oz
    (48 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 37 mm)
    42/51 oz-in
    (3.0/3.7 kg-cm)
    0.19/0.15 sec
    @ 60 deg
    3 pole, top ball bearing $12.95
    HS-422 Deluxe Servo 1.6 oz
    (45.5 g)
    0.77 x 1.59 x 1.44 in
    (19.8 x 40.6 x 36.6 mm)
    45.8/56.9 oz-in
    (3.3/4.1 kg-cm)
    0.21/0.16 sec
    @ 60 deg
    3 pole, dual oilite bearing, nylon gears $12.95
    HS-425BB Pro Dual BB 1.6 oz
    (45.5 g)
    0.77 x 1.59 x 1.44 in
    (19.8 x 40.6 x 36.6 mm)
    45.8/56.9 oz-in
    (3.3/4.1 kg-cm)
    0.21/0.16 sec
    @ 60 deg
    3 pole, dual ball bearing, resin gears $14.95
    HS-425HB Super Pro BB 1.6 oz
    (45.5 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 36 mm)
    45.8/56.9 oz-in
    (3.3/4.1 kg-cm)
    0.21/0.16 sec
    @ 60 deg
    3 pole, dual ball bearing $22.95
    HS-475HB Heavy Duty Ball Bearing 1.4 oz
    (39 g)
    0.8 x 1.5 x 1.4 in
    (20 x 38 x 35 mm)
    61/76 oz-in
    (4.3/5.5 kg-cm)
    0.23/0.18 sec
    @ 60 deg
    3 pole, dual ball bearing $27.95
    HS-525BB High Speed Ball Bearing 1.65 oz
    (45.2 g)
    0.77 x 1.56 x 1.41 in
    (19.8 x 39.8 x 36 mm)
    45.8/56.9 oz-in
    (3.3/4.1 kg-cm)
    0.17/0.13 sec
    @ 60 deg
    5 pole, nylon gears, 1 ball bearing, oilite bushing $29.95
    HS-525MG High Speed Metal Gear 1.78 oz
    (51 g)
    0.77 x 1.56 x 1.41 in
    (19.8 x 39.8 x 36 mm)
    45.8/56.9 oz-in
    (3.3/4.1 kg-cm)
    0.17/0.13 sec
    @ 60 deg
    5 pole, metal gears, dual ball bearings $59.95
    HS-545BB Ball Bearing Servo 1.56 oz
    (44.5 g)
    0.77 x 1.56 x 1.41 in
    (19.8 x 39.8 x 36 mm)
    61.1/76.4 oz-in
    (4.4/5.5 kg-cm)
    0.22/0.17 sec
    @ 60 deg
    5 pole, nylon gears, 1 ball bearing, oilite bushing $29.95
    HS-605BB Ball Bearing Servo 1.73 oz
    (49 g)
    0.8 x 1.6 x 1.6 in
    (20 x 41 x 40 mm)
    92 oz-in
    (6.6 kg-cm)
    0.13 sec
    @ 60 deg
    3 pole ferrite, dual ball bearings $59.95
    HS-605MG Ball Bearing, Metal Gear 1.72 oz
    (49 g)
    0.77 x 1.59 x 1.57 in
    (20 x 41 x 40 mm)
    76.4/94.4 oz-in
    (5.5/6.8 kg-cm)
    0.17/0.13 sec
    @ 60 deg
    3 pole, metal gears, dual ball bearings $28.95
    HS-615MG Ball Bearing, Metal Gear 2.12 oz 0.8 x 1.6 x 1.5 in
    (20 x 41 x 38 mm)
    132 oz-in
    (9.5 kg-cm)
    0.17 sec
    @ 60 deg
    Dual Ball Bearing $75.95
    HS-625MG Ultra Speed Metal Gear 1.94 oz
    (55.1 g)
    0.77 x 1.59 x 1.48 in
    (20 x 41 x 38 mm)
    76.4/94.4 oz-in
    (5.5/6.8 kg-cm)
    0.18/0.15 sec
    @ 60 deg
    3 pole, metal gears, dual ball bearings $28.95
    HS-645MG Ultra Torque Metal Gear 1.94 oz
    (55.1 g)
    0.77 x 1.59 x 1.48 in
    (20 x 41 x 38 mm)
    106.9/1.33.3 oz-in
    (7.7/9.6 kg-cm)
    0.24/0.20 sec
    @ 60 deg
    3 pole, metal gears, dual ball bearings $39.95
    HS-700BB Standard 1/4 Scale 3.6 oz
    (102 g)
    1.14 x 2.32 x 2.04 in
    (29 x 59 x 52 mm)
    138.9/173.6 oz-in
    (10/12.5 kg-cm)
    0.22/0.17 sec
    @ 60 deg
    3 pole, nylon gears, 1 ball bearing, oilite bushing $25.95
    HS-705MG Metal Gear 1/4 Scale 4.72 oz
    (134 g)
    1.14 x 2.33 x 2.05 in
    (29 x 59 x 52 mm)
    161.1/201.4 oz-in
    (11.6/14.5 kg-cm)
    0.26/0.20 sec
    @ 60 deg
    3 pole, nylon gears, 1 ball bearing, oilite bushing $35.95
    HS-715BB Ball Bearing Sail Arm 3.59 oz
    (102 g)
    1.14 x 2.32 x 2.04 in
    (29 x 59 x 52 mm)
    161.1/201.4 oz-in
    (11.6/14.5 kg-cm)
    0.25/0.19 sec
    @ 60 deg
    3 pole, nylon gears, top ball bearing, oilite bushing $35.95
    HS-725BB 3.5 Turn Sail Drum 3.9 oz
    (110 g)
    1.14 x 2.32 x 2.04 in
    (29 x 59 x 52 mm)
    161.1/201.4 oz-in
    (14.5 kg-cm)
    1.5/1.1 sec
    @ 360deg
    3 pole, nylon gears, 1 ball bearing, oilite bushing $48.95
    HS-805BB Mega Torque 1/4 Scale 5.4 oz
    (152 g)
    1.18 x 2.59 x 1.26 in
    (30 x 66 x 58 mm)
    275.0/343.0 oz-in
    (19.8/24.7 kg-cm)
    0.19/0.14 sec
    @ 60 deg
    3 pole, heavy duty nylon gears, dual ball bearings $43.95
    HS-815BB 140 Degree Sail Arm 5.4 oz
    (152 g)
    1.18 x 2.59 x 1.26 in
    (30 x 66 x 58 mm)
    275.0/343.0 oz-in
    (19.8/24.7 kg-cm)
    0.19/0.14 sec
    @ 60 deg
    3 pole, heavy duty nylon gears, dual ball bearings $48.95
    HS-925MG High Speed Coreless 2.0 oz
    (56 g)
    0.78 x 1.55 x 1.48 in
    (20 x 39 x 38 mm)
    84.7/106.7 oz-in
    (6.1/7.7 kg-cm)
    0.20/0.11 sec
    @ 60 deg
    coreless, metal gears, dual ball bearings $149.99
    HS-945MG High Torque Coreless 2.0 oz 0.78 x 1.55 x 1.48 in
    (20 x 39 x 38 mm)
    122.2/152.8 oz-in
    (8.8/11.0 kg-cm)
    0.12 sec
    @ 60 deg
    Coreless, metal gears, dual ball bearing $149.99
    HS-5125MG Digital Slim Wing Servo 0.84 oz
    (25.0 g)
    0.51 x 1.14 x 1.18 in
    (13 x 29 x 30 mm)
    41.7/48.6 oz-in
    (3.0/3.5 kg-cm)
    0.17/0.13 sec
    @ 60 deg
    3 pole ferrite motor, all metal gears, dual ball bearing $65.95
    HS-5245MG Digital High Torque Servo 1.12 oz
    (32.0 g)
    0.7 x 1.3 x 1.18 in
    (17 x 32 x 30 mm)
    61/76 oz-in
    (4.4/5.5 kg-cm)
    0.17/0.13 sec
    @ 60 deg
    3 pole, Alumite metal gears, dual ball bearing $65.95
    HS-5425MG Digital Mini 0.84 oz
    (24.0 g)
    0.51 x 1.14 x 1.18 in
    (13 x 29 x 30 mm)
    41.7/48.6 oz-in
    (3.0/3.5 kg-cm)
    0.17/0.13 sec
    @ 60 deg
    3 pole ferrite motor, all metal gears, dual ball bearing $65.95
    HS-5475HB Digital High Torque Heavy Duty 1.4 oz
    (39 g)
    0.8 x 1.5 x 1.4 in
    (20 x 38 x 35 mm)
    61/76 oz-in
    (4.3/5.5 kg-cm)
    0.23/0.18 sec
    @ 60 deg
    3 pole, dual ball bearing New!
    HS-5625MG Digital High Speed 2.11 oz
    (60.0 g)
    0.77 x 1.59 x 1.48 in
    (20 x 41 x 38 mm)
    109.0/131.0 oz-in
    (7.9/9.4 kg-cm)
    0.17/0.14 sec
    @ 60 deg
    3 pole, 3 metal gears, dual ball bearings $54.95
    HS-5645MG Digital High Torque 2.11 oz
    (60.0 g)
    0.77 x 1.59 x 1.48 in
    (20 x 41 x 38 mm)
    143.0/168.0 oz-in
    (12.1/10.3 kg-cm)
    0.23/0.18 sec
    @ 60 deg
    3 pole, Alumite metal gears, dual ball bearings $54.95
    HS-5645HB Digital 1/4 Scale 5.14 oz
    (146 g)
    1.14 x 2.32 x 2.04 in
    (29 x 59 x 52 mm)
    222.2/263.9 oz-in
    (16/19 kg-cm)
    0.16/0.13 sec
    @ 60 deg
    3 pole, metal gears, dual ball bearings $69.95
    HS-5735MG Digital 1/4 Scale 5.1 oz
    (146 g)
    1.1 x 2.3 x 2.0 in
    (29 x 59 x 52 mm)
    122/264 oz-in
    (16/19 kg-cm)
    0.16/0.13 sec
    @ 60 deg
    3 pole, metal gears, dual ball bearing, heat sink $89.95
    HS-5925MG Digital Coreless High Speed 1.97 oz
    (56 g)
    0.78 x 1.55 x 1.48 in
    (20 x 39 x 38 mm)
    102.8/127.8 oz-in
    (7.4/9.2 kg-cm)
    0.10/0.08 sec
    @ 60 deg
    Coreless, metal gears, dual ball bearing $89.95
    HS-5945MG Digital Coreless High Torque 2.0 oz
    (56 g)
    0.8 x 1.2 x 1.5 in
    (20 x 39 x 38 mm)
    153/181 oz-in
    (11/13 kg-cm)
    0.16/0.13 sec
    @ 60 deg
    coreless, metal gears, dual ball bearing $89.95
    HS-5975HB Digital Heavy Duty High Speed 1.76 oz
    (49 g)
    0.8 x 1.5 x 1.5 in
    (20 x 38 x 38 mm)
    91/109 oz-in
    (6.5/7.8 kg-cm)
    0.13/0.10 sec
    @ 60 deg
    coreless, resin gears, dual ball bearing $89.95 New!

     

    JR
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    507 Standard 1.47 oz
    (41.7 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    40.3 oz-in
    (2.9 kg-cm)
    0.22 sec
    @ 60 deg
    3-Pole Ferrite -?-
    513 Standard Retract 1.72 oz
    (48.8 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    67 oz-in
    (4.8 kg-cm)
    1.25 sec
    @ 60 deg
    5-pole ferrite, Single Ball Bearing $32.95
    517 Standard Ball Bearing 1.58 oz
    (44.9 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    40.3 oz-in
    (2.9 kg-cm)
    0.25 sec
    @ 60 deg
    3-Pole Ferrite -?-
    527 Standard Sport 1.47 oz
    (41.7 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    40.3 oz-in
    (2.9 kg-cm)
    0.25 sec
    @ 60 deg
    3-pole ferrite, No Bearings $17.95
    531 Premium Sport 1.50 oz
    (42.6 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    51 oz-in
    (3.7 kg-cm)
    0.21 sec
    @ 60 deg
    3-pole ferrite, Single Ball Bearing $39.95
    537 Standard Sport BB 1.58 oz
    (44.9 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    43 oz-in
    (3.1 kg-cm)
    0.25 sec
    @ 60 deg
    3-pole ferrite, Single Ball Bearing $26.95
    Z550 Premium race 1.5 oz
    (42.6 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    60 oz-in
    (4.5 kg-cm)
    0.09 sec
    @ 60 deg
    3-Pole Ferrite $34.95
    Z590M ** Torque race servo xx oz
    (xx g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    70 oz-in
    (5.1 kg-cm)
    xx sec
    @ 60 deg
    3-Pole Ferrite, metal gears $34.95
    605 Monster FET 4.75 oz
    (134.9 g)
    1.26 x 2.50 x 2.30 in
    (32 x 64 x 58 mm)
    139.1 oz-in
    (10.0 kg-cm)
    0.28 sec
    @ 60 deg
    Cored Motor, Dual Bearings $99.95
    615 Ultra Torque Monster FET 5.12 oz
    (145.4 g)
    1.26 x 2.50 x 2.30 in
    (32 x 64 x 58 mm)
    181 oz-in
    (13.1 kg-cm)
    0.19 sec
    @ 60 deg
    Coreless, Dual Ball Bearings $99.95
    703 Low Profile Retract 1.16 oz
    (32.9 g)
    0.88 x 1.73 x 0.93 in
    (22 x 44 x 24 mm)
    93.2 oz-in
    (6.7 kg-cm)
    1.36 sec
    @ 60 deg
    Cored, Dual Ball Bearings, 160 deg $89.95
    911 Mid Size Low Profile BB 1.13 oz
    (32.1 g)
    0.71 x 1.41 x 1.03 in
    (18 x 36 x 26 mm)
    43.1 oz-in
    (3.1 kg-cm)
    0.27 sec
    @ 60 deg
    5 pole ferrite, Dual Ball Bearings $52.95
    2700G Precision Hi-Speed 2.0 oz
    (56.8 g)
    0.73 x 1.29 x 1.52 in
    (19 x 33 x 39 mm)
    49 oz-in
    (3.5 kg-cm)
    0.11 sec
    @ 60 deg
    Raced, Dual Ball Bearing $89.95
    2721 Ultra-Torque Alloy 1.84 oz
    (52.3 g)
    0.73 x 1.29 x 1.32 in
    (19 x 33 x 34 mm)
    116 oz-in
    (8.4 kg-cm)
    0.18 sec
    @ 60 deg
    Coreless, Dual Ball Bearing $139.95
    Z2750 Super Race 2.0 oz
    (56.8 g)
    0.73 x 1.52 x 1.29 in
    (19 x 39 x 33 mm)
    62.0 oz-in
    (4.5 kg-cm)
    0.17 sec
    @ 60 deg
    Coreless, Dual Bearings $124.95
    3025 Ultra Speed 0.95 oz
    (27.0 g)
    0.58 x 1.30 x 1.02 in
    (15 x 33 x 26 mm)
    29.2 oz-in
    (2.1 kg-cm)
    0.15 Coreless, Dual Bearings $62.95
    3321 Wing Ball Bearing Servo 0.95 oz
    (27.0 g)
    0.58 x 1.30 x 1.30 in
    (15 x 33 x 33 mm)
    59.8 oz-in
    (4.3 kg-cm)
    0.36 sec
    @ 60 deg
    Coreless, Dual Bearings $74.95
    4000 Super Servo 1.76 oz
    (50.0 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    73.6 oz-in
    (5.3 kg-cm)
    0.17 sec
    @ 60 deg
    Coreless, Dual Bearings $124.95
    4131 Ultra Precision 1.50 oz
    (42.6 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    90.4 oz-in
    (6.5 kg-cm)
    0.23 sec
    @ 60 deg
    Coreless, Dual Ball Bearings $79.95
    4721 Ultra Torque 1.72 oz
    (48.8 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    119.6 oz-in
    (8.6 kg-cm)
    0.22 sec
    @ 60 deg
    Coreless, Dual Ball Bearings $84.95
    4735 Ultra Speed 1.72 oz
    (48.8 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    90.0 oz-in
    (6.5 kg-cm)
    0.15 sec
    @ 60 deg
    Coreless, Dual Ball Bearings $84.95
    Z4750 Ultra Race Servo 1.72 oz
    (48.8 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    96 oz-in
    (6.9 kg-cm)
    0.12 sec
    @ 60 deg
    Coreless, Dual Bearings $84.95
    7005 Low Profile High Speed 1.31 oz
    (37.2 g)
    0.88 x 1.73 x 0.93 in
    (22 x 44 x 24 mm)
    62.6 oz-in
    (4.5 kg-cm)
    0.19 sec
    @ 60 deg
    Coreless, Dual Ball Bearings $89.95
    7100 Low Profile Super 1.31 oz
    (37.2 g)
    0.88 x 1.73 x 0.93 in
    (22 x 44 x 24 mm)
    60.5 oz-in
    (4.4 kg-cm)
    0.19 sec
    @ 60 deg
    Coreless, Dual Ball Bearings $124.95
    8101 Ultra Precision 1.73 oz
    (49.1 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    90.4 oz-in
    (6.5 kg-cm)
    0.23 sec
    @ 60 deg
    Coreless, Dual Ball Bearings, 160 deg $74.95
    8700G High Speed Super S 2.11 oz
    (59.9 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    49.9 oz-in
    (3.6 kg-cm)
    0.09 sec
    @ 60 deg
    Coreless, Dual Ball Bearings (wide spaced) $129.95
    9011 Mid Size 1.31 oz
    (37.2 g)
    0.75 x 1.04 x 1.42 in
    (19 x 26 x 36 mm)
    60.6 oz-in
    (4.4 kg-cm)
    0.21 sec
    @ 60 deg
    Coreless, Dual Ball Bearings $62.95
    DS368 Digital Servo 0.80 oz
    (22.7 g)
    0.50 x 1.12 x 1.17 in
    (13 x 28 x 30 mm)
    53 oz-in
    (3.8 kg-cm)
    0.21 sec
    @ 60 deg
    Cored, metal gears, No Bearings $69.95
    DS811 Digital Advanced Sport 1.44 oz
    (40.9 g)
    0.75 x 1.49 x 1.52 in
    (19 x 38 x 39 mm)
    54/66 oz-in
    (3.9/4.8 kg-cm)
    0.18/0.15 sec
    @ 60 deg
    Cored, plastic gears, Single ball bearing $47.99
    DS3301 Digital Wing Servo 1.00 oz
    (28.4 g)
    0.58 x 1.30 x 1.30 in
    (15 x 33 x 33 mm)
    56 oz-in
    (4.0 kg-cm)
    0.22 sec
    @ 60 deg
    Coreless, nylon gears, Dual Ball Bearings $89.95
    DS3421 Digital High Speed 1.04 oz
    (29.5 g)
    0.58 x 1.30 x 1.02 in
    (15 x 33 x 26 mm)
    65 oz-in
    (4.7 kg-cm)
    0.18 sec
    @ 60 deg
    Coreless, Dual Ball Bearings $84.95
    DS8231 Digital Ultra Precision 1.76 oz
    (50.0 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    88 oz-in
    (6.4 kg-cm)
    0.22 sec
    @ 60 deg
    Coreless, nylon gears, Dual Ball Bearings $129.95
    DS8411 Digital Servo 2.03 oz
    (57.7 g)
    0.73 x 1.54 x 1.32 in
    (19 x 39 x 34 mm)
    155 oz-in
    (11.2 kg-cm)
    0.18 sec
    @ 60 deg
    Coreless, Dual Ball Bearings (wide spaced) $159.95
    DS8417 ** Digital High Speed 2.03 oz
    (57.7 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    xx oz-in
    (xx kg-cm)
    0.10 sec
    @ 60 deg
    Coreless, alloy gears, Dual Ball Bearings (wide spaced) $159.95
    DS8450 Digital Ultra Speed 1.92 oz
    (54.5 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    98 oz-in
    (7.1 kg-cm)
    0.10/0.08 sec
    @ 60 deg
    Coreless, alloy gears, Dual Ball Bearings (wide spaced) $159.95
    DS8550 Digital Ultra Torque Race 2.03 oz
    (57.7 g)
    0.73 x 1.52 x 1.32 in
    (19 x 39 x 34 mm)
    188 oz-in
    (13.6 kg-cm) 6v
    0.15 sec
    @ 60 deg 6v
    Coreless, alloy gears, Dual Ball Bearings $114.95
    DS9411 Digital High Speed 1.36 oz
    (38.6 g)
    0.75 x 1.41 x 1.03 in
    (19 x 36 x 26 mm)
    82 oz-in
    (5.9 kg-cm)
    0.15 sec
    @ 60 deg
    Coreless, Dual Ball Bearings $99.95


    KO Propo
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    PS-712 FET High Torque FET Servo 1.68 oz
    (48.1 g)
    0.83 x 1.6 x 1.38 in
    (21 x 41 x 35 mm)
    61.0 oz-in
    (4.4 kg-cm)
    0.12 sec
    @ 60 deg
      -?-
    PS-713 FET High Speed FET Servo 1.68 oz
    (48.1 g)
    0.83 x 1.6 x 1.38 in
    (21 x 41 x 35 mm)
    73.4 oz-in
    (5.3 kg-cm) @ 7.2v
    0.10 sec
    @ 60 deg @ 7.2v
      -?-
    PS-401 High Speed Almighty Servo 1.65 oz
    (47 g)
    0.83 x 1.6 x 1.38 in
    (21 x 41 x 35 mm)
    44.3 oz-in
    (3.2 kg-cm) 6v
    0.16 sec
    @ 60 deg 6v
      $41.50
    KOPM1100 Metal Gear Servo 2.1 oz
    (59.6 g)
    0.83 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    97 oz-in
    (7.0 kg-cm) 7.2v
    0.06 sec
    @ 60 deg
      -?-
    KOPM1101 Metal Gear Servo 2.1 oz
    (59.6 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    91 oz-in
    (6.5 kg-cm)
    0.08 sec
    @ 60 deg
      -?-
    KOPM1104 Metal Gear Servo 2.1 oz
    (59.6 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    104.5 oz-in
    (7.5 kg-cm)
    0.13 sec
    @ 60 deg
      -?-
    KOPM1115 Ultra high speed 1.8 oz
    (51.1 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    100.4 oz-in
    (7.2 kg-cm) @ 7.2v
    0.05 sec
    @ 60 deg @ 7.2v
      -?-
    PS-2001 FET High Speed Servo 1.8 oz
    (51.1 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    90 oz-in
    (6.5 kg-cm) @ 6v
    0.08 sec
    @ 60 deg @ 6v
    coreless, dual ball bearings, metal gears -?-
    PS-2004 FET High Torque Servo 1.8 oz
    (51.1 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    104 oz-in
    (7.5 kg-cm) @ 6v
    0.13 sec
    @ 60 deg @ 6v
    coreless, dual ball bearings, metal gears -?-
    PS-2015 FET High Speed Lightweight Servo 1.79 oz
    (51.0 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    100.4 oz-in
    (7.2 kg-cm) @ 7.2v
    0.05 sec
    @ 60 deg @ 7.2v
    coreless, dual ball bearings -?-
    PS-2113 FET High Speed FET Servo 1.76 oz
    (50.0 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    131.7 oz-in
    (9.5 kg-cm) @ 7.2v
    0.06 sec
    @ 60 deg @ 7.2v
    plastic gears -?-
    PS-2123 FET Digital Power Servo 1.9 oz
    (55.0 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    131.7 oz-in
    (9.5 kg-cm) @ 7.2v
    0.06 sec
    @ 60 deg @ 7.2v
    coreless, metal gears, dual ball bearings $129.99
    PS-2143 FET Digital High Speed Servo 1.93 oz
    (54.5 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    111.0 oz-in
    (8.0 kg-cm) @ 6.0v
    0.08 sec
    @ 60 deg @ 6.0v
    coreless, metal gears, dual ball bearings $124.99
    PS-2144 FET Digital High Torque Servo 1.9 oz
    (54.2 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    180.5 oz-in
    (13.0 kg-cm) @ 6.0v
    0.13 sec
    @ 60 deg @ 6.0v
    coreless, metal gears, dual ball bearings $124.99
    PS-2173 FET High Speed Power Servo 1.93 oz
    (54.5 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    111.0 oz-in
    (8.0 kg-cm) @ 6v
    0.09 sec
    @ 60 deg @ 6v
    coreless, metal gears, dual ball bearings $129.99
    PS-2174 FET High Torque Power Servo 1.93 oz
    (54.5 g)
    0.8 x 1.5 x 1.6 in
    (20 x 38 x 41 mm)
    166.3 oz-in
    (12.0 kg-cm) @ 6v
    0.13 sec
    @ 60 deg @ 6v
    coreless, metal gears, dual ball bearings $129.99

     

    Tower Hobbies
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    TS-35MG Hi Power Metal Gear Mini 1.09 oz
    (31 g)
    0.7 x 1.3 x 1.2 in
    (18 x 33 x 30 mm)
    55.0/67 oz-in
    (4.0/4.8 kg-cm)
    0.14/0.11 sec
    @ 60 deg
    top ball bearing $32.99
    TS-53 Standard Servo 1.5 oz
    (42.6 g)
    0.77 x 1.59 x 1.41 in
    (20 x 40 x 36 mm)
    42 oz-in
    (3.0 kg-cm)
    0.22 sec
    @ 60 deg
      $9.99
    TS-59 Low Profile Aileron BB 1.24 oz
    (35.2 g)
    0.9 x 1.7 x 1.0 in
    (23 x 43 x 25 mm)
    61.6/77.0 oz-in
    (4.5/5.6 kg-cm)
    0.18/0.14 sec
    @ 60 deg
    watertight, metal & resin gears, single ball bearing $27.99
    TS-63 Low Profile Retract 1.23 oz
    (34.9 g)
    0.8 x 1.7 x 1.0 in
    (20 x 43 x 25 mm)
    90 oz-in
    (5.6 kg-cm)
    0.50 sec
    @ 60 deg
    1 ball bearing, 1 oilite bushing $32.99
    TS-65 Hi-Torque Standard 2BB 1.73 oz
    (49.1 g)
    0.8 x 1.6 x 1.5 in
    (20 x 43 x 38 mm)
    77 oz-in
    (5.6 kg-cm)
    0.16 sec
    @ 60 deg
    helical resin gears $29.99
    TS-67 Standard 2BB 1.61 oz
    (45.7 g)
    0.8 x 1.6 x 1.4 in
    (20 x 43 x 36 mm)
    43 oz-in
    (3.1 kg-cm)
    0.20 sec
    @ 60 deg
    Dual Ball Bearing $17.99
    TS-69 Standard Ball Bearing 1.61 oz
    (43.2 g)
    0.77 x 1.59 x 1.41 in
    (20 x 40 x 36 mm)
    42 oz-in
    (3.0 kg-cm)
    0.22 sec
    @ 60 deg
      $14.99
    TS-70MG Super Torque 2 BB 2.11 oz
    (59.9 g)
    0.77 x 1.59 x 1.48 in
    (20 x 40 x 38 mm)
    106.7/133.3 oz-in
    (7.7/9.6 kg-cm)
    0.24/0.20 sec
    @ 60 deg
    metal gears $37.99
    TS-75 1/4 Scale Ball Bearing 3.6 oz
    (102.2 g)
    1.14 x 2.32 x 1.97 in
    (29 x 59 x 50 mm)
    110 oz-in
    (7.9 kg-cm)
    0.19 sec
    @ 60 deg
      $32.99
    TS-80 S2K Giant Scale 2BB 5.36 oz
    (152 g)
    1.18 x 2.59 x 1.26 in
    (30 x 66 x 58 mm)
    275/343 oz-in
    (19.8/24.7 kg-cm)
    0.19/0.14 sec
    @ 60 deg
    watertight, dual ball bearings $42.99




    Cirrus
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    CS-60BB Pro Ball Bearing 1.58 oz
    (44.9 g)
    0.79 x 1.60 x 1.49 in
    (20 x 41 x 38 mm)
    51.4 oz-in
    (3.7 kg-cm)
    0.14 sec
    @ 60 deg
    Ball Bearing $16.99
    CS-60MG Pro Metal Gear 1.94 oz
    (55.1 g)
    0.79 x 1.60 x 1.49 in
    (20 x 41 x 38 mm)
    63 oz-in
    (4.5 kg-cm)
    0.17 sec
    @ 60 deg
    Ball Bearing $21.99
    CS-61 Standard Sport 1.75 oz
    (44.5 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 36 mm)
    42 oz-in
    (3.1 kg-cm)
    0.17 sec
    @ 60 deg
    Bushings $10.99
    CS-63 Low Profile Retract 1.23 oz
    (35 g)
    0.9 x 1.73 x 1.0 in
    (23 x 44 x 25 mm)
    90 oz-in
    (3.2 kg-cm)
    0.17 sec
    @ 60 deg
    Ball Bearings $32.99
    CS-65 High Torque Standard 1.73 oz
    (49.1 g)
    0.8 x 1.6 x 1.5 in
    (20 x 41 x 38 mm)
    77 oz-in
    (9.3 kg-cm)
    0.16 sec
    @ 60 deg
    Dual Ball Bearings $29.99
    CS-67 Standard Ball Bearing 1.61 oz
    (46 g)
    0.8 x 1.6 x 1.4 in
    (20 x 41 x 36 mm)
    43 oz-in
    (3.1 kg-cm)
    0.20 sec
    @ 60 deg
    Cored, Nylon Gears, Dual Ball Bearing $15.99
    CS-70 Pro 1.55 oz
    (44.0 g)
    0.77 x 1.59 x 1.48 in
    (20 x 40 x 38 mm)
    45.8 oz-in
    (3.3 kg-cm)
    0.12 sec
    @ 60 deg
    Bushings -?-
    CS-70MG Super Torque 2.1 oz
    (60 g)
    0.77 x 1.59 x 1.48 in
    (20 x 40 x 38 mm)
    106.7/133.3 oz-in
    (7.7/9.6 kg-cm)
    0.24/0.20 sec
    @ 60 deg
    Dual Ball Bearings, Metal Gears $40.99
    CS-70BB Pro Ball Bearing 1.55 oz
    (44.0 g)
    0.77 x 1.59 x 1.48 in
    (20 x 40 x 38 mm)
    45.8 oz-in
    (3.3 kg-cm)
    0.12 sec
    @ 60 deg
    Ball Bearing -?-
    CS-71 Standard 1.48 oz
    (42.0 g)
    0.79 x 1.40 x 1.55 in
    (20 x 36 x 39 mm)
    39/44 oz-in
    (2.8/3.2 kg-cm)
    0.18/0.15 sec
    @ 60 deg
    No bearings $9.99
    CS-71BB Standard 1.48 oz
    (42.0 g)
    0.79 x 1.40 x 1.55 in
    (20 x 36 x 39 mm)
    39/44 oz-in
    (2.8/3.2 kg-cm)
    0.18/0.15 sec
    @ 60 deg
    Ball Bearing $13.99
    CS-72 1/4 Scale BB 3.5 oz
    (102 g)
    1.14 x 1.32 x 2.05 in
    (29 x 59 x 52 mm)
    130.6 oz-in
    (9.5 kg-cm)
    0.22 sec
    @ 60 deg
    Cored, Ball Bearing $28.99
    CS-75BB Coreless Ball Bearing 1.59 oz
    (45.2 g)
    0.77 x 1.57 x 1.37 in
    (20 x 40 x 35 mm)
    79 oz-in
    (5.7 kg-cm)
    0.06 sec
    @ 60 deg
    Coreless, Ball Bearing $47.99
    CS-75MG Metal Gear Ball Bearing 1.59 oz
    (45.2 g)
    0.77 x 1.57 x 1.37 in
    (20 x 40 x 35 mm)
    79 oz-in
    (5.7 kg-cm)
    0.06 sec
    @ 60 deg
    Coreless, Ball Bearing $51.99
    CS-80 Giant Scale BB 5.36 oz
    (152 g)
    1.18 x 2.59 x 2.26 in
    (30 x 66 x 58 mm)
    275/343 oz-in
    (19.8/24.7 kg-cm)
    0.19/0.14 sec
    @ 60 deg
    Dual Ball Bearing, Watertight $39.99
    CS-80MG Pro Metal Gear 2.01 oz
    (57.1 g)
    0.79 x 1.60 x 1.49 in
    (20 x 40 x 38 mm)
    129.8 oz-in
    (9.4 kg-cm)
    0.25 sec
    @ 60 deg
    Ball Bearing $22.99
    CS-90 Low Profile 1.48 oz
    (42.0 g)
    0.88 x 1.75 x 1.13 in
    (22 x 44 x 29 mm)
    34.7 oz-in
    (2.5 kg-cm)
    0.14 sec
    @ 60 deg
    Bushings $12.99
    CS-90BB Low Profile 1.13 oz
    (32.1 g)
    0.88 x 1.75 x 1.13 in
    (22 x 44 x 29 mm)
    36.1 oz-in
    (2.6 kg-cm)
    0.23 sec
    @ 60 deg
    Ball Bearing $17.99
    CS-100 Retract Servo 1.2 oz
    (34.1 g)
    0.89 x 1.78 x 0.97 in
    (22 x 44 x 25 mm)
    111 oz-in
    (8 kg-cm)
    1.5 sec
    @ 180 deg
    Ball Bearing $24.99
    CS-400 Giant 4.0 oz
    (113.6 g)
    1.04 x 2.15 x 2.03 in
    (26 x 55 x 52 mm)
    180 oz-in
    (18 kg-cm)
    0.20 sec
    @ 60 deg
    Ball Bearing -?-
    CS-600 FET Jumbo 5.22 oz
    (148 g)
    1.27 x 2.48 x 2.22 in
    (32 x 63 x 56 mm)
    333 oz-in
    (24 kg-cm)
    0.22 sec
    @ 60 deg
    Ball Bearing -?-
    CS-650 Mega Pro BB 5.80 oz
    (164.7 g)
    1.26 x 2.48 x 2.43 in
    (32 x 63 x 62 mm)
    254/309 oz-in
    (18.3/22.3 kg-cm)
    0.19/0.16 sec
    @ 60 deg
    Ball Bearing $49.99


    Expert
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    SL500 Standard Servo 1.55 oz
    (44.3 g)
    0.73 x 1.32 x 1.52 in
    (yy x zz x yy mm)
    47.0 oz-in
    (3.4 kg-cm)
    0.24 sec
    @ 60 deg
      $12.95
    SL561 Std Servo, High Speed, BB 1.50 oz
    (42.9 g)
    0.73 x 1.37 x 1.51 in
    (19 x zz x yy mm)
    46.1 oz-in
    (3.4 kg-cm)
    0.18 sec
    @ 60 deg
      $14.95
    SL571 Std Servo, High Torque, BB 1.35 oz
    (38.6 g)
    0.73 x 1.37 x 1.51 in
    (19 x 35 x 38 mm)
    62.4 oz-in
    (4.5 kg-cm)
    0.21 sec
    @ 60 deg
      $17.95
    SL661 Low Profile, High Speed, BB 1.20 oz
    (34.3 g)
    0.88 x 0.92 x 1.74 in
    (22 x 21 x 44 mm)
    40.2 oz-in
    (2.9 kg-cm)
    0.15 sec
    @ 60 deg
      $20.95
    SL680 Low Profile, Retract Servo 1.15 oz
    (32.9 g)
    0.88 x 0.92 x 1.74 in
    (22 x 21 x 44 mm)
    88.6 oz-in
    (6.4 kg-cm)
    1.12 sec
    @ 160 deg
      $23.95
    SL851 Giant Pro FET Servo 5.10 oz
    (145 g)
    1.36 x 2.30 x 2.50 in
    (35 x 58 x 64 mm)
    180 oz-in
    (13.1 kg-cm)
    0.19 sec
    @ 60 deg
    dual bearings, coreless $44.95


    FMA
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    PS300 Premiere Series Standard 1.86 oz
    (52.8 g)
    0.79 x 1.59 x 1.40 in
    (20.1 x 40.4 x 35.6 mm)
    36/43 oz-in
    (2.6/3.1 kg-cm)
    0.24/0.20 sec
    @ 60 deg
    Metal Bushing, Nylon Gear $13.95
    PS300BB Premiere Series Standard 1.86 oz
    (52.8 g)
    0.79 x 1.59 x 1.40 in
    (20.1 x 40.4 x 35.6 mm)
    36/43 oz-in
    (2.6/3.1 kg-cm)
    0.24/0.20 sec
    @ 60 deg
    Dual Ball Bearing, Nylon Gear $16.95
    S301 Dual Ball Bearing 1.55 oz
    (44.0 g)
    0.80 x 1.60 x 1.50 in
    (20 x 41 x 38 mm)
    41.7 oz-in
    (3.0 kg-cm)
    0.14 sec
    @ 60 deg
      $14.95
    S350 Dual Ball Bearing 1.69 oz
    (48.0 g)
    0.80 x 1.60 x 1.50 in
    (20 x 41 x 38 mm)
    50.0 oz-in
    (3.6 kg-cm)
    0.21 sec
    @ 60 deg
      $17.95
    S355 Dual Ball Bearing 1.69 oz
    (48.0 g)
    0.80 x 1.60 x 1.70 in
    (20 x 41 x 43 mm)
    114.0 oz-in
    (8.2 kg-cm)
    0.31 sec
    @ 60 deg
      $19.95
    S350M 2BB Metal Gear 1.95 oz
    (55.4 g)
    0.80 x 1.60 x 1.50 in
    (20 x 41 x 38 mm)
    50.0 oz-in
    (3.6 kg-cm)
    0.21 sec
    @ 60 deg
      $19.95
    S355M 2BB Metal Gear 2.00 oz
    (56.8 g)
    0.80 x 1.60 x 1.70 in
    (20 x 41 x 43 mm)
    114.0 oz-in
    (8.2 kg-cm)
    0.31 sec
    @ 60 deg
      $21.95
    S360 Dual Ball Bearing 1.69 oz
    (48.0 g)
    0.80 x 1.60 x 1.70 in
    (20 x 41 x 43 mm)
    81.0 oz-in
    (5.8 kg-cm)
    0.19 sec
    @ 60 deg
      $19.95
    S360M 2BB Metal Gear 2.00 oz
    (56.8 g)
    0.80 x 1.60 x 1.70 in
    (20 x 41 x 43 mm)
    81.0 oz-in
    (5.8 kg-cm)
    0.19 sec
    @ 60 deg
    metal gears, dual ball bearing $21.95
    PS500BB Premiere Series High Output 2.08 oz
    (59.1 g)
    0.79 x 1.59 x 1.59 in
    (20 x 40 x 40 mm)
    63/78 oz-in
    (4.5/5.6 kg-cm)
    0.15/0.13 sec
    @ 60 deg
    Dual Ball Bearing, Nylon Gear $29.95
    PS500MBB Premiere Series High Output 2.42 oz
    (68.7 g)
    0.79 x 1.59 x 1.59 in
    (20 x 40 x 40 mm)
    63/78 oz-in
    (4.5/5.6 kg-cm)
    0.15/0.13 sec
    @ 60 deg
    Dual Ball Bearing, All Metal Gear $33.95
    S3501 Dual Ball Bearing 1.73 oz
    (49.1 g)
    0.80 x 1.60 x 1.50 in
    (20 x 41 x 38 mm)
    83.0 oz-in
    (6.0 kg-cm)
    0.10 sec
    @ 60 deg
    Coreless $44.95
    S3551 Dual Ball Bearing 1.73 oz
    (49.1 g)
    0.80 x 1.60 x 1.70 in
    (20 x 41 x 43 mm)
    98.0 oz-in
    (7.1 kg-cm)
    0.16 sec
    @ 60 deg
    Coreless, dual ball bearings $44.95
    S3601 Dual Ball Bearing 1.73 oz
    (49.1 g)
    0.80 x 1.60 x 1.70 in
    (20 x 41 x 43 mm)
    108.0 oz-in
    (7.8 kg-cm)
    0.13 sec
    @ 60 deg
    Coreless, dual ball bearings $44.95
    S3501M Dual Ball Bearing Metal Gear 1.83 oz
    (52.0 g)
    0.80 x 1.60 x 1.50 in
    (20 x 41 x 38 mm)
    83.0 oz-in
    (6.0 kg-cm)
    0.10 sec
    @ 60 deg
    Coreless, metal gear, dual ball bearings $47.95
    S3551M Dual Ball Bearing Metal Gear 1.83 oz
    (52.0 g)
    0.80 x 1.60 x 1.70 in
    (20 x 41 x 43 mm)
    98.0 oz-in
    (7.1 kg-cm)
    0.16 sec
    @ 60 deg
    Coreless, metal gear, dual ball bearings $47.95
    S3601M Dual Ball Bearing Metal Gear 1.83 oz
    (52.0 g)
    0.80 x 1.60 x 1.70 in
    (20 x 41 x 43 mm)
    108.0 oz-in
    (7.8 kg-cm)
    0.13 sec
    @ 60 deg
    Coreless, metal gear, dual ball bearings $47.95
    S400 Giant 2BB 4.0 oz
    (113.6 g)
    1.04 x 2.14 x 2.02 in
    (26 x 54 x 51 mm)
    180.5 oz-in
    (13.0 kg-cm) @ 6v
    0.20 sec
    @ 60 deg @ 6v
    dual ball bearings $24.95
    S500 Giant - 2BB - FET Amp 5.4 oz
    (153.4 g)
    1.27 x 2.48 x 2.22 in
    (32 x 63 x 56 mm)
    298 oz-in
    (21.5 kg-cm)
    @ 6v
    0.22 sec
    @ 60 deg @ 6v
    dual ball bearings $44.95
    S550 Sail Winch Servo 5.4 oz
    (153.4 g)
    1.27 x 2.48 x 2.22 in
    (32 x 63 x 56 mm)
    298 oz-in
    (21.5 kg-cm)
    1.50 sec
    @ 60 deg
      $54.95
    S555 Sail Arm Servo 5.4 oz
    (153.4 g)
    1.27 x 2.48 x 2.22 in
    (32 x 63 x 56 mm)
    298 oz-in
    (21.5 kg-cm)
    0.75 sec
    @ 60 deg
      TBA
    S600 Retract BB 1.13 oz
    (32.1 g)
    0.89 x 1.78 x 0.97 in
    (23 x 45 x 25 mm)
    100 oz-in
    (7.2 kg-cm)
    0.50 sec
    @ 60 deg
      $24.95
    S700 Low Height BB 1.20 oz
    (34.1 g)
    0.89 x 1.76 x 1.13 in
    (23 x 45 x 29 mm)
    30.5 oz-in
    (2.2 kg-cm)
    0.09 sec
    @ 60 deg
      $17.95
    S701 Low Standard 1.48 oz
    (42.0 g)
    0.89 x 1.76 x 1.13 in
    (23 x 45 x 29 mm)
    43.0 oz-in
    (3.1 kg-cm)
    0.23 sec
    @ 60 deg
      $12.95
    PS705MBB Premiere Series High Output 2.42 oz
    (68.7 g)
    0.79 x 1.59 x 1.59 in
    (20 x 40 x 40 mm)
    85/106 oz-in
    (6.1/7.6 kg-cm) 106
    0.24/0.20 sec
    @ 60 deg 20
    Dual Ball Bearing, All Metal Gear $33.95
    PS905MBB Premiere Series High Output 2.42 oz
    (68.7 g)
    0.79 x 1.59 x 1.59 in
    (20 x 40 x 40 mm)
    110/135 oz-in
    (7.9/9.7 kg-cm)
    0.34/0.27 sec
    @ 60 deg
    Dual Ball Bearing, All Metal Gear $33.95

     

    MPI
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    MX-400HP Standard Pro Servo 1.60 oz
    (45.4 g)
    0.79 x 1.60 x 1.50 in
    (20 x 41 x 38 mm)
    44 oz-in
    (3.2 kg-cm)
    0.15 sec
    @ 60 deg
    Oilite Bushings $9.99
    MX-450MG High Torque Metal Gear 1.48 oz
    (42.0 g)
    0.77 x 1.57 x 1.37 in
    (19.5 x 40 x 35 mm)
    116 oz-in
    (8.4 kg-cm)
    0.18 sec
    @ 60 deg
    Dual Ball Bearing $36.99
    MX-460MG High Speed Metal Gear 1.73 oz
    (49.1)
    0.77 x 1.57 x 1.37 in
    (19.5 x 40 x 35 mm)
    100 oz-in
    (7.2 kg-cm)
    0.14 sec
    @ 60 deg
    Dual Ball Bearing $36.99
    MX-870MG Coreless High Torque 1.83 oz
    (52.0 g)
    0.77 x 1.57 x 1.37 in
    (19.5 x 40 x 35 mm)
    111 oz-in
    (8.0 kg-cm)
    0.10 sec
    @ 60 deg
    Dual Ball Bearing $52.99
    MX-890MG Coreless High Speed 1.59 oz
    (45.2 g)
    0.77 x 1.57 x 1.37 in
    (19.5 x 40 x 35 mm)
    100 oz-in
    (7.2 kg-cm)
    0.08 sec
    @ 60 deg
    Dual Ball Bearing $52.99

     

    Multiplex
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    Mini HD Standard Sport (65122) 1.52 oz
    (43 g)
    0.8 x 1.6 x 1.4 in
    (40 x 205 x 37 mm)
    42/51 oz-in
    (0.30/0.36 kg-cm)
    0.18/0/0.15 sec
    @ 60 deg
    3 pole ferrite/ heavy-duty nylon gears $29.65
    Super FL Digi Mini (65xxx) 0.95 oz
    (27 g)
    1.3 x 1.4 x 0.7 in
    (32 x 35 x 17 mm)
    41/51 oz-in
    (2.8/3.5 kg-cm)
    0.25/0/0.20 sec
    @ 60 deg
    3 pole ferrite/Dual BB/plastic gears  
    Profi BB FET Mini (65171) 1.69 oz
    (48.0 g)
    0.75 x 1.4 x 1.5 in
    (19 x 36 x 38 mm)
    64 oz-in
    (4.6 kg-cm)
    0.17 sec
    @ 60 deg
    ball bearings, FET amplifier $57.61
    Power BB FET Mini Power (65186) 2.89 oz
    (82.0 g)
    0.9 x 1.8 x 1.8 in
    (23 x 46 x 46 mm)
    103 oz-in
    (7.4 kg-cm)
    0.26 sec
    @ 60 deg
    ball bearings, FET amplifier $105.61
    Super FL mc/V2 Digital Flat Servo (65163) 0.85 oz
    (24.1 g)
    0.4 x 1.6 x 1.7 in
    (10 x 41 x 43 mm)
    34/40 oz-in
    (2.5/2.9 kg-cm)
    0.21/0.17 sec
    @ 60 deg
    maximum travel 100 deg $94.70
    Micro mc/V2 Digital Servo (65178) 0.99 oz
    (28 g)
    0.6 x 1.3 x 1.3 in
    (15 x 33 x 33 mm)
    48/55 oz-in
    (3.5/4.0 kg-cm)
    0.21/0.17 sec
    @ 60 deg
    maximum travel 173 deg $93.05
    Micro Speed mc/V2 Digital Servo (65175) 0.99 oz
    (28 g)
    0.6 x 1.3 x 1.3 in
    (15 x 33 x 33 mm)
    34/41 oz-in
    (2.5/3.0 kg-cm)
    0.09/0.07 sec
    @ 60 deg
    maximum travel 173 deg $94.70
    Royal mc/V2 Digital Servo (65173) 1.6 oz
    (46 g)
    0.8 x 1.6 x 1.6 in
    (20 x 41 x 41 mm)
    71/78 oz-in
    (5.1/5.6 kg-cm)
    0.15/0.13 sec
    @ 60 deg
    maximum travel 188 deg $76.66
    Profi mc/V2 Digital Servo (65174) 1.7 oz
    (49 g)
    0.8 x 1.4 x 1.5 in
    (20 x 36 x 38 mm)
    68/75 oz-in
    (4.9/5.4 kg-cm)
    0.17/0.14 sec
    @ 60 deg
    maximum travel 194 deg $94.70
    Profi Speed mc/V2 Digital Servo (65138) 1.7 oz
    (49 g)
    0.8 x 1.4 x 1.5 in
    (20 x 36 x 38 mm)
    57/62 oz-in
    (4.1/4.5 kg-cm)
    0.12/0.10 sec
    @ 60 deg
    maximum travel 194 deg $93.19
    Super FL V2 Digital Flat Servo (65363) 0.85 oz
    (24.1 g)
    0.43 x 1.61 x 1.67 in
    (11 x 41 x 42 mm)
    28/34 oz-in
    (2.0/2.5 kg-cm)
    0.20/0.16 sec
    @ 60 deg
      $71.79
    Cockpit V2 Digital Servo (65385) 0.94 oz
    (27 g)
    0.65 x 1.37 x 1.28 in
    (17 x 35 x 33 mm)
    40.0/50.0 oz-in
    (2.9/3.6 kg-cm)
    0.14/0.11 sec
    @ 60 deg
      $55.54
    Micro Digi Digital Servo (65378) 1.06 oz
    (30 g)
    0.59 x 1.3 x 1.26 in
    (15 x 33 x 32 mm)
    48.0/59.0 oz-in
    (3.5/4.3 kg-cm)
    0.18/0.14 sec
    @ 60 deg
    3 pole ferrite/Dual BB/Metal gears $71.79
    Micro Speed BB Digital Servo (65375) 1.06 oz
    (30 g)
    0.59 x 1.4 x 1.26 in
    (15 x 33 x 32 mm)
    35.0/44.0 oz-in
    (2.5/3.2 kg-cm)
    0.11/0.08 sec
    @ 60 deg
    3 pole ferrite/Dual BB/Metal gears $71.79
    Royal Digi Digital Servo (65373) 1.62 oz
    (46 g)
    0.83 x 1.57 x 1.61 in
    (21 x 40 x 41 mm)
    64.0/79.0 oz-in
    (4.6/5.7 kg-cm)
    0.15/0.12 sec
    @ 60 deg
    3 pole ferrite/Dual BB/Nylon gears $66.23
    Profi Digi Digital Servo (65374) 1.69 oz
    (48 g)
    0.75 x 1.42 x 1.54 in
    (19 x 36 x 39 mm)
    62.0/78.0 oz-in
    (4.5/5.6 kg-cm)
    0.15/0.12 sec
    @ 60 deg
    3 pole ferrite/Dual BB/Metal gears $82.95
    Profi Speed BB Digital Servo (65338) 1.69 oz
    (48 g)
    0.75 x 1.42 x 1.54 in
    (19 x 36 x 39 mm)
    48.0/59.0 oz-in
    (3.5/4.3 kg-cm)
    0.15/0.09 sec
    @ 60 deg
    3 pole ferrite/Dual BB/Metal gears $82.95
    Power Digi Digital Servo (65376) 2.89 oz
    (82 g)
    0.91 x 1.85 x 1.85 in
    (23 x 47 x 47 mm)
    99.0/123.0 oz-in
    (7.1/8.9 kg-cm)
    0.29/0.23 sec
    @ 60 deg
    3 pole ferrite/Dual BB/Metal gears $109.37
    Power Speed BB Digital Servo (65383) 2.89 oz
    (82 g)
    0.91 x 1.85 x 1.85 in
    (23 x 47 x 47 mm)
    85.0/106.0 oz-in
    (6.0/7.5 kg-cm)
    0.29/0.24 sec
    @ 60 deg
      $111.51
    Jumbo Digi Digital Servo (65377) 5.57 oz
    (158 g)
    1.18 x 2.36 x 2.36 in
    (30 x 60 x 60 mm)
    204.0/255.0 oz-in
    (14.7/18.4 kg-cm)
    0.24/0.19 sec
    @ 60 deg
    3 pole ferrite/Dual BB/Metal gears $128.35
    Jumbo Speed BB Digital Servo (65384) 5.57 oz
    (158 g)
    1.18 x 2.36 x 2.36 in
    (30 x 60 x 60 mm)
    166.0/205.0 oz-in
    (11.7/14.5 kg-cm)
    0.27/0.14 sec
    @ 60 deg
    3 pole ferrite/Dual BB/Metal gears $133.91

     

    GWS (Grand Wing Servo)
    Servo # Description Weight Dimensions
    (W x L x H)
    Torque Speed Motor/ Bearings Street Price
    Pico BB Pico BB Servo 0.19 oz
    (5.4 g)
    0.37 x 0.90 x 0.61 in
    (9.5 x 22.8 x 15.5 mm)
    10/12 oz-in
    (0.7 kg-cm)
    0.12/0.09 sec
    @ 60 deg
      $21.99
    Naro HP BB Nano HP BB Servo 0.31 oz
    (8.8 g)
    0.43 x 0.86 x 0.78 in
    (11 x 22 x 19.8 mm)
    19/24 oz-in
    (1.4/1.7 kg-cm)
    0.09/0.07 sec
    @ 60 deg
      $19.99

    SEA Drill and Tap Chart

    Metric Drill and Tap Chart

    Search FAQ

    Select this option if you would like your search to look in the text of FAQ items as well as their titles.

    Select an option here to specify how you would like your search query to be treated. 'Any words' will return the most numerous but possibly least relevant results, while 'Complete phrase' will return only results that contain exactly what you are searching for.